![]() |
|
Home | Forum | Online Store | Information | LJ Webcam | Gallery | Register | FAQ | Community | Calendar | Today's Posts | Search |
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Senior Member
Join Date: May 2009
Posts: 478
|
Livewell Switch Repair
My livewell quit working on the water yesterday, and I've confirmed it's not the battery, so probably the switch. I'm not real handy with wiring and electrical stuff, and would like to get back on the water. Fastlane isn't doing repairs this week, so I'm wondering if anyone else in SD does this and would have the parts. It's one of the last they made of the old model. Not V2.
Anybody got a lead for me? If not I'll try to get the part and do it myself. Also, I think when my previous unit was repaired they coated the whole switch in epoxy or something so it wouldn't go down again. Can the V2 switch be put into the old livewell? I'd prefer not do go through this every year. Thanks, Tom |
![]() |
![]() |
![]() |
#2 |
Administrator
Join Date: Mar 2005
Location: 1-2 miles off the point
Posts: 6,943
|
Tom in a pinch you can just bypass the switch in the set up and just clip the 2 wires and connect em directly , then just connect battery when in use. The wires would need to be clipped any way and it will get you by.......I have done this more than once, once even when on the water. You really can't change to the new switch, but you can wire up a toggle instead of the live well plunger style
__________________
![]() ![]() |
![]() |
![]() |
![]() |
#3 |
Senior Member
Join Date: May 2009
Posts: 478
|
Thanks Andy!
Based on what I'm seeing, do you think the switch is the most likely culprit? |
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: Jun 2014
Location: East County San Diego
Posts: 657
|
Over the years, I have replaced the switch in the hobie livewell three times.
Now, I just bypass it. At first it was annoying, but now its fine. Simply insert battery, but do not connect till after launching or right before making bait. If you've tested the battery and its good, then most likely the switch, but I have replaced the pump as well. Simply connect the pump straight to the battery and see if it works. |
![]() |
![]() |
![]() |
#5 |
Junior
Join Date: Sep 2019
Posts: 21
|
See if there are any marine stores open. Like West Marine. I bought a replacement push pull switch at one up here in Temecula. One thing to check though that happened to me, my battery charger was bad and it was the last thing I replaced. If it doesn't light up when you plug it in the wall without the battery, your charger is bad.
|
![]() |
![]() |
![]() |
#6 | |
Senior Member
Join Date: Jan 2012
Posts: 2,526
|
until I switched over to new tank and switch
Quote:
|
|
![]() |
![]() |
![]() |
|
|