|
|
|
08-22-2018, 05:55 AM
|
#1 |
|
Sea Hunter
Join Date: Nov 2011
Location: Where ever I may roam where I lay my head I call home.
Posts: 2,269
  |
Spineless......
I decided to turn my 8ft graphite rod into a two piece, so I can put it inside my kayak. BTW I don't recommend
useing 8ft graphite rods for kayak fishing in kelp beds easy to snap, if you snag the bottom. This rod has caught 45lb albacore and I like it. The ferrule i'm putting is a locking screw ferrule.
__________________
Duke Mitchell Last edited by MITCHELL; 08-22-2018 at 06:05 AM. |
|
|
|
08-22-2018, 06:31 AM
|
#2 |
|
Sea Hunter
Join Date: Nov 2011
Location: Where ever I may roam where I lay my head I call home.
Posts: 2,269
|
After stripping off, all the old guides .....
And cutting the rod in half....as im checking the rod for the spine by bending and rolling it .all the sudden I hear a snap SOAB....no offense mom.the second half of the rod brakes about 8ins from the tip.....when rapping a rod you want the spine up for spinning rods and the spine down for conventional reels.well after thinking about moving the tip down...i decided I don't like the action so I think to my self how can I fix this I got nothing to loose now...if it brakes I can always move the tip down just cut and glue a new tip on when im fishing glue stick cigar lighter. So I put a stainless steel rod in side 1/16 with plenty of 2part epoxy...and call it done can't wait to fight a fish and see.i did put an extra rap of thread and flexcoat tho on the joint
__________________
Duke Mitchell |
|
|
|
|
08-22-2018, 06:39 AM
|
#3 |
|
Sea Hunter
Join Date: Nov 2011
Location: Where ever I may roam where I lay my head I call home.
Posts: 2,269
|
1/16 in rod is the biggest...
I can fit inside blank.....
__________________
Duke Mitchell |
|
|
|
|
08-22-2018, 06:47 AM
|
#4 |
|
Sea Hunter
Join Date: Nov 2011
Location: Where ever I may roam where I lay my head I call home.
Posts: 2,269
|
Guess I don't no my own.........
Strength ......
__________________
Duke Mitchell Last edited by MITCHELL; 08-22-2018 at 07:47 AM. |
|
|
|
|
08-22-2018, 07:26 AM
|
#5 |
|
Sea Hunter
Join Date: Nov 2011
Location: Where ever I may roam where I lay my head I call home.
Posts: 2,269
|
I suggest keeping your thread......
In a Ziploc and out of light....or you will be overlapping to hide the ugly spots in the thread....
__________________
Duke Mitchell |
|
|
|
|
08-22-2018, 08:35 AM
|
#6 |
|
Made in U.S.A.
Join Date: Oct 2012
Location: Dana Point
Posts: 1,625
|
Dude just put a new tip where it broke, or make a gaff out of the butt end. You can't trust it anymore.
__________________
Hobie PA 14 ¸.·´¯`·.´¯`·.¸¸.·´¯`·.¸><(((º> Jackson Kraken ¸.·´¯`·.¸.·´¯`·.´¯`·.¸¸.·´¯`·.¸><(((º> Malibu X-Factor ¸.·´¯`·.´¯`·.¸¸.·´¯`·.¸><(((º> Malibu Stealth-12 ¸.·´¯`·.´¯`·.¸¸.·´¯`·.¸><(((º> Its not a spelling B its a fishing B  ~yakjoe
|
|
|
|
 |
|
|
Hybrid Mode
