DIY transducer scupper with hot water?

[sculpins4bait]

I have a tarpon 160i and love the fast sleek hull, and I prefer to have my transducer in the water. Any of you guys think it’s possible to heat the scupper area and create an indentation for my ducer so that it doesn’t create as much drag? I know the hot water method can work for dents and deformations but not sure about the scupper area with the rigid tube going through the yak and how hard that would be. Should I just forget about this idea? Pretty nice out there lately have fun


Sent from my iPhone using Tapatalk

[goldenglory18]

I think there are other alternatives out there that are a better/safer way about it.

Do you have a rudder? If not, my suggestion would be a rear keel DIY setup. I had that on my old Ride (original design close to the Pescador) and it was fantastic...

[makobob]

Look at the Berley Pro transducer mount, it will reduce
drag and protect your transducer at the same time.

[Iceman]

I would not attempt to manipulate the area to accommodate a transducer

[Fiskadoro]

I did this with an old Fish and Dive I use for hoop netting. I used a heat gun not hot water. Mine has worked fine, with no issues but it's not an easy thing to do, and I would not recommend it. The deal is it's very easy to make the plastic too thin by stretching it to much, and you cant easily add reinforcement. If you are set on trying this I can take some pics of mine and tell you what I did to make it seaworthy, but once again I would not recommend it.

I mounted inset transducers in four kayaks before the commercial ones were available, using four different methods. They all worked but this was probably the hardest way to do it.

[Fiskadoro]

Originally Posted by Iceman

I would not attempt to manipulate the area to accommodate a transducer

Where's the like button? Yeah Andy knows. Scuppers perform both a utilitarian and structural function. You mess with them it's a real can of worms.

[sculpins4bait]

ok just as I suspected, thanks everyone for the advice. I didnt wanna butcher my sweet ride anyways. I think ill just get creative with hydrodynamic goop sculpting.

[acorad]

Originally Posted by goldenglory18

Do you have a rudder? If not, my suggestion would be a rear keel DIY setup. I had that on my old Ride (original design close to the Pescador) and it was fantastic...

These sound interesting, what are the rudder and keel options? Do you haver any photos?

Andy

[Saba Slayer]

It's tough to get the kelp and eel Grass off of the transducer when it's mounted way back there...
This method might work in fresh water but no so much out on the Big Pond...
Check with Andy...he had an over the side mount on his kayak at the tourney.
There is nothing wrong with mounting inside the yak and shooting your sonar through the plastic. You don't get temp readings but at least you aren't cleaning crap off your transducer all the time.

[acorad]

Thanks Jim, that makes sense.

Andy

[Hunters Pa]

Hey Jim (Day), do you still have the post on here somewhere that has the mount using neoprene and aluminum plate that puts the ducer in direct contact with the water? My post was on Jason's old site and the forums are no longer accessible. I know it sparked a lot of spirited conversation, but it worked very well for me and I would not be averse to doing it again.

[goldenglory18]

Originally Posted by acorad

These sound interesting, what are the rudder and keel options? Do you haver any photos?

Andy

http://palmettokayakfishing.blogspot...-for-2012.html

As Jim said, its not ideal for heavy kelp or eel grass, but for everything else it would work just fine.