Winters Bone...... - Kayak Fishing Adventures on Big Water’s Edge

MITCHELL · 02-14-2017, 09:15 PM

Inspired by the novel. Daniel Woodrell.
30in Halibut yielded 5 lbs of fillets....
The liquid nail did not work,it pulled apart.

kirkdavis · 02-15-2017, 06:01 AM

Nice! So, if the liquid nails did not work, What did? I think I would use epoxy.

Deamon · 02-15-2017, 08:52 AM

Mitchell...Man, you are one of a kind!

How much for the whip ass paddle?

Jim

MITCHELL · 02-15-2017, 11:00 AM

Hi gloss or no gloss...Michael's for that beautiful peace of wood....
Spankyou.

SDROB · 02-15-2017, 11:17 AM

I wasn't sure what to expect clicking on this thread

Haha

Geno Machino · 02-15-2017, 11:47 AM

Cool!

MITCHELL · 02-15-2017, 11:47 AM

On valentine's day.....

bwana · 02-15-2017, 12:33 PM

Quote:

Originally Posted by kirkdavis

Nice! So, if the liquid nails did not work, What did? I think I would use epoxy.

I use Paleobond. http://www.paleobond.com/

Works great on bones and all types of multi-surfaces, gems, jewelry. Fixes everything.

It makes superglue look like Elmers.

kirkdavis · 02-15-2017, 12:53 PM

Quote:

Originally Posted by bwana

I use Paleobond. http://www.paleobond.com/

Works great on bones and all types of multi-surfaces, gems, jewelry. Fixes everything.

It makes superglue look like Elmers.

Thanks for the info. I had never heard of it. I do scrimshaw, and I use epoxy, but I reduce the amount of hardener so the end result has a little flex to it to make up for the expansion/ contraction as the temperature and humidity of the piece changes.

skrilla · 02-16-2017, 07:22 AM

Sweet fillet job.

Phishphood · 02-17-2017, 07:15 PM

So what method did you use to clean the bones this time?

MITCHELL · 02-17-2017, 07:31 PM

I cut it in half and baked head and back bone till it pulled apart then put into boiling water....then scrubbed bones with a toothbrush and air dryed...next time I'm going to try putting in a crock pot after I bake to see if the bones come out clean to cut down on the toothbrush work
Use flex coat two part epoxy 5min to construct with cheapest and strong.Never tryed paloBond but I think it more expensive

MrPukaShell · 02-18-2017, 04:39 AM

Take a look at "U-40 Rod Bond" epoxy. It is two jells that you mix together and you have around 45 minuted to work with. It is thick and stays where you put it. Also has a little flex to it and not brittle. I use it on reel seats when putting rods together and have found other uses for it around the house.

MITCHELL · 02-18-2017, 05:51 AM

The jelly might cut down on the holding time...
Maybe add a little white color to look like cartridge.

02-15-2017, 08:52 AM	#3
Deamon Senior Member Join Date: Mar 2010 Posts: 1,972	Mitchell...Man, you are one of a kind! How much for the whip ass paddle? Jim __________________ Recreational Fisherman's Catch...2% Commercial Fisherman's Catch- 98% Recreational Fishing Kayakers Catch- .00001% "The reality is that the wall was built to keep all Asians ~specifically Japanese and those that think they're japanese~ out of the U.S"

02-15-2017, 11:00 AM	#4
MITCHELL Sea Hunter Join Date: Nov 2011 Location: Where ever I may roam where I lay my head I call home. Posts: 2,277	With stain or without..... Hi gloss or no gloss...Michael's for that beautiful peace of wood.... Spankyou. __________________ Duke Mitchell

02-15-2017, 11:17 AM	#5
SDROB Malibu Stealth 12 Join Date: Feb 2012 Location: Hollywood, San Diego, Gonzaga Bay Posts: 512	I wasn't sure what to expect clicking on this thread Haha __________________ She will keep you warm in the winter and give you shade in the summer (Rossman) I'm telling ya, you have to keep these suckers on a game clip until just before you drop them in the frying pan.(Rossman)

02-15-2017, 11:47 AM	#6
Geno Machino "Relax" Join Date: Dec 2011 Location: O'side Posts: 553	Cool! __________________

02-15-2017, 11:47 AM	#7
MITCHELL Sea Hunter Join Date: Nov 2011 Location: Where ever I may roam where I lay my head I call home. Posts: 2,277	I no...especially On valentine's day..... __________________ Duke Mitchell

02-15-2017, 06:01 AM	#2
kirkdavis Senior Member Join Date: Apr 2015 Location: SD County Posts: 360	Nice! So, if the liquid nails did not work, What did? I think I would use epoxy.

02-16-2017, 07:22 AM	#10
skrilla Senior Member Join Date: Jun 2011 Location: San Diego Posts: 664	Sweet fillet job. __________________ Urban Camo Trident 13

02-17-2017, 07:15 PM	#11
Phishphood Senior Member Join Date: Sep 2015 Posts: 346	So what method did you use to clean the bones this time?

02-17-2017, 07:31 PM	#12
MITCHELL Sea Hunter Join Date: Nov 2011 Location: Where ever I may roam where I lay my head I call home. Posts: 2,277	First off no stinky trash.... I cut it in half and baked head and back bone till it pulled apart then put into boiling water....then scrubbed bones with a toothbrush and air dryed...next time I'm going to try putting in a crock pot after I bake to see if the bones come out clean to cut down on the toothbrush work Use flex coat two part epoxy 5min to construct with cheapest and strong.Never tryed paloBond but I think it more expensive __________________ Duke Mitchell

02-18-2017, 04:39 AM	#13
MrPukaShell Senior Member Join Date: Jun 2010 Location: Ventura COunty Posts: 521	Take a look at "U-40 Rod Bond" epoxy. It is two jells that you mix together and you have around 45 minuted to work with. It is thick and stays where you put it. Also has a little flex to it and not brittle. I use it on reel seats when putting rods together and have found other uses for it around the house.

02-18-2017, 05:51 AM	#14
MITCHELL Sea Hunter Join Date: Nov 2011 Location: Where ever I may roam where I lay my head I call home. Posts: 2,277	Thanks The jelly might cut down on the holding time... Maybe add a little white color to look like cartridge. __________________ Duke Mitchell