SOLD - 2014 Hobie PA14 with Magneta Trailer - Kayak Fishing Adventures on Big Water’s Edge

Ricsen · 08-02-2016, 10:34 PM

Hello,
I'm selling my PA14 and Magneta trailer, along with the listed accessories:

2014 Hobie PA14, dune color. Excellent condition. Always washed after each use and kept on trailer in garage. Has upgraded larger rudder. Vantage seat with high/low seating positions, adjustable lumbar, adjustable reclining, adjustable leg rest. Turbo fins. Anchor trolley. Hobie bait tank with Johnson 500 gph pump. Bait tank has five mounted rod holders (two additional) and upgraded waterproof toggle switch.

Magneta trailer, made in USA, hot dip galvanized, freeway rated high speed tires. Fitted with Hobie PA saddles and tie down eye bolts. Ratchet tie downs included. Trailer is in excellent condition. Trailer cost was $1100, not including the PA saddles.

One 12 volt AGM battery
Two 6 volt AGM batteries
Hobie paddle
10 lb mushroom anchor with approx 80'-100' anchor rope
Hobie drift chute/sea anchor
Lowrance Elite 5 HDI Gold with 83/200 455/800 transducer (original box and manuals)
Two Scotty Powerlock rod holders with extensions
Two Ram Tube rod holders with mounts/hardware
Three Hobie rod leashes and Hobie Pedal leash
Hobie Type III PFD/fishing vest
VisiCarbon Pro light with orange Hobie flag
Wheel Eez kayak cart
Two Plano 3600 tackle boxes and extra storage bin for tackle compartment
Promar folding fishing net
Hand bilge pump
Pelican 1120 waterproof battery box
Mustad fish bat
Big game fish clip
Fish gripper
Extra Tsunami 500 gph bait pump
Extra hatch "O" rings and miscellaneous fittings for wiring, etc
May have a handmade Calcutta bamboo gaff to add to the above items.

I'll try and post a few photos tomorrow, or I can text them to you. Just send me a PM.

SOLD

Ricsen · 08-03-2016, 11:54 AM

Pictures added.

SP Dan · 08-03-2016, 01:23 PM

Can the length of the trailer arm; at the hitch, be shortened or folded up during storage in a garage?
What is the over all length of the yak and trailer together?

Where are you located?

Dan

Ricsen · 08-03-2016, 02:53 PM

Hi Dan,
The length from the trailer tongue to the end of the kayak is 16'. I purchased a 2' trailer tongue extension from Magneta and it's attached with two bolts, so it's easily removed. If you did that, you'd be basically left with just the length of the kayak (13'7"). The width of the trailer from fender to fender is 4'10". I'm located in Oceanside. Sent you my cell on PM.
Thanks,
Rich

m7vasque · 08-03-2016, 03:20 PM

Are you open to selling some of the accessories separately?

Ricsen · 08-03-2016, 03:24 PM

Hi. I'd prefer to sell as a package at this point, but thanks for asking.

Hunters Pa · 08-03-2016, 05:34 PM

Quote:

Originally Posted by SP Dan

Can the length of the trailer arm; at the hitch, be shortened or folded up during storage in a garage?
What is the over all length of the yak and trailer together?

Where are you located?

Dan

Looks like you might be able to adjust the location of the front crossbar. Sliding it forward would shift the kayak forward, shortening the overall length. Tough to tell for certain from the pics

Ricsen · 08-03-2016, 07:39 PM

Yes you're right. The front crossbar is held by a u-bolt, so it can be slid further forward. Actually, the entire center channel that holds the tongue can be slid rearward to really shorten the trailer length. Ends up where the trailer length can be much shorter than the actual kayak. A very strong and well built trailer. Magneta (out of Hull, Iowa) offers a bolt on kit to handle another kayak either to the side or on top. I'll try to get another photo or two posted.

Ricsen · 08-03-2016, 10:27 PM

Here are some additional photos with other accessories/gaff/extra parts/Glare Stomper for fish finder. Sorry, couldn't get the pictures to rotate correctly.

Ricsen · 08-06-2016, 08:30 PM

Sale pending.

Ricsen · 08-07-2016, 11:25 AM

SOLD

08-03-2016, 02:53 PM	#4
Ricsen Member Join Date: Jul 2014 Posts: 65	Hi Dan, The length from the trailer tongue to the end of the kayak is 16'. I purchased a 2' trailer tongue extension from Magneta and it's attached with two bolts, so it's easily removed. If you did that, you'd be basically left with just the length of the kayak (13'7"). The width of the trailer from fender to fender is 4'10". I'm located in Oceanside. Sent you my cell on PM. Thanks, Rich Last edited by Ricsen; 08-03-2016 at 04:24 PM.

08-03-2016, 11:54 AM	#2
Ricsen Member Join Date: Jul 2014 Posts: 65	Pictures added.

08-03-2016, 01:23 PM	#3
SP Dan Member Join Date: Jul 2014 Location: San Pedro, Ca Posts: 62	Can the length of the trailer arm; at the hitch, be shortened or folded up during storage in a garage? What is the over all length of the yak and trailer together? Where are you located? Dan

08-03-2016, 03:20 PM	#5
m7vasque Member Join Date: Feb 2016 Location: Encinitas, Ca Posts: 36	Are you open to selling some of the accessories separately?

08-03-2016, 03:24 PM	#6
Ricsen Member Join Date: Jul 2014 Posts: 65	Hi. I'd prefer to sell as a package at this point, but thanks for asking.

08-03-2016, 07:39 PM	#8
Ricsen Member Join Date: Jul 2014 Posts: 65	Yes you're right. The front crossbar is held by a u-bolt, so it can be slid further forward. Actually, the entire center channel that holds the tongue can be slid rearward to really shorten the trailer length. Ends up where the trailer length can be much shorter than the actual kayak. A very strong and well built trailer. Magneta (out of Hull, Iowa) offers a bolt on kit to handle another kayak either to the side or on top. I'll try to get another photo or two posted.

08-06-2016, 08:30 PM	#10
Ricsen Member Join Date: Jul 2014 Posts: 65	Sale pending.

08-07-2016, 11:25 AM	#11
Ricsen Member Join Date: Jul 2014 Posts: 65	SOLD