Fish finder finally installed.. - Kayak Fishing Adventures on Big Water’s Edge

yak-fishing-socal · 01-15-2015, 07:09 PM

So I finally put holes in my kayak, 5 to be exact.had plans to use the transducer capable scupper but my transducer was just to big...had to make a transducer arm on the fly and I think it came out pretty good.might add shrink tubing to it later. But the whole thing can be removed and put on my other kayak if I ever needed too..

Now hopefully I'll be able to get out some time soon and try my new finder

ceviche eater · 01-15-2015, 07:19 PM

looks good

old_rookie · 01-16-2015, 07:40 AM

I have the similar Ocean Kayak trident 13' - with a transducer supporting scupper hole, and the same FF set up, I think - hard to read the model # in the pic. I see in the pic the transducer has that extra bracket. When I opened the box for mine, it came with the bracket like I see in your pic, but it was separate and can slide onto the transducer head. Once on it was a challenge to take off and not very obvious that it could be removed. So - is it possible that is the case with your transducer? If you can remove that extra bracket you might be able to mount it in the scupper.

yak-fishing-socal · 02-02-2015, 04:29 PM

Yea that's the same as mine I tried that too and didn't like how much of it was still vulnerable and not tucked up into the recessed area..do you have a picture of your transducer in the scupper?
@old_rookie

old_rookie · 02-03-2015, 08:12 PM

This is the transducer in a OK Trident 13. It is pointing backwards, but I think that is only an issue in a hydrodynamical sense.

yak-fishing-socal · 02-09-2015, 06:51 AM

Oh nice I didn't think about putting it in backwards..thanks for the info I might have to give this a shot

yak-fishing-socal · 02-09-2015, 07:02 AM

No but I think everything would be already past you when you see it on the screen

yak-fishing-socal · 02-09-2015, 07:25 AM

Oh it does.good to know I'll keep my transducers arm

old_rookie · 02-09-2015, 08:00 AM

For this unit I don't think it matters - there isn't any side scan going on. It emits a cone and whatever is in that cone is shown on the screen. Orientation of the cone doesn't matter. With a display screen scrolling from right to left, we have no idea if the fish are swimming through the cone left to right, right to left, forward or backward. Unless I'm missing something - I'm open to corrections.

yak-fishing-socal · 02-09-2015, 08:29 AM

@old_rookie what way does your screen scroll?

rhyak · 02-09-2015, 09:39 AM

Quote:

Originally Posted by yak-fishing-socal

@old_rookie what way does your screen scroll?

Your screen will scroll the same way no matter what. Its built into the FF system that way.

Think what he is saying it unless you have side imaging which you do not does not matter you can face that thing side ways and would work just fine.

old_rookie · 02-10-2015, 07:34 AM

Yup - it scrolls right to left. And at a constant rate too, regardless of my paddling speed - not that I expect it to match.

YakDout · 02-10-2015, 09:51 AM

You can however change the scroll speed on the HDS at least

01-15-2015, 07:09 PM	#1
yak-fishing-socal kayak fishing socal Join Date: Nov 2013 Location: Southern California / Whittier Posts: 438	Fish finder finally installed.. So I finally put holes in my kayak, 5 to be exact.had plans to use the transducer capable scupper but my transducer was just to big...had to make a transducer arm on the fly and I think it came out pretty good.might add shrink tubing to it later. But the whole thing can be removed and put on my other kayak if I ever needed too.. Now hopefully I'll be able to get out some time soon and try my new finder

01-15-2015, 07:19 PM	#2
ceviche eater Senior Member Join Date: Oct 2013 Location: Mission hills Posts: 133	looks good

01-16-2015, 07:40 AM	#3
old_rookie Senior Member Join Date: Mar 2010 Location: Santee Posts: 904	I have the similar Ocean Kayak trident 13' - with a transducer supporting scupper hole, and the same FF set up, I think - hard to read the model # in the pic. I see in the pic the transducer has that extra bracket. When I opened the box for mine, it came with the bracket like I see in your pic, but it was separate and can slide onto the transducer head. Once on it was a challenge to take off and not very obvious that it could be removed. So - is it possible that is the case with your transducer? If you can remove that extra bracket you might be able to mount it in the scupper.

02-02-2015, 04:29 PM	#4
yak-fishing-socal kayak fishing socal Join Date: Nov 2013 Location: Southern California / Whittier Posts: 438	Yea that's the same as mine I tried that too and didn't like how much of it was still vulnerable and not tucked up into the recessed area..do you have a picture of your transducer in the scupper? @old_rookie

02-09-2015, 06:51 AM	#6
yak-fishing-socal kayak fishing socal Join Date: Nov 2013 Location: Southern California / Whittier Posts: 438	Oh nice I didn't think about putting it in backwards..thanks for the info I might have to give this a shot

02-09-2015, 07:02 AM	#7
yak-fishing-socal kayak fishing socal Join Date: Nov 2013 Location: Southern California / Whittier Posts: 438	No but I think everything would be already past you when you see it on the screen

02-09-2015, 07:25 AM	#8
yak-fishing-socal kayak fishing socal Join Date: Nov 2013 Location: Southern California / Whittier Posts: 438	Oh it does.good to know I'll keep my transducers arm

02-09-2015, 08:00 AM	#9
old_rookie Senior Member Join Date: Mar 2010 Location: Santee Posts: 904	For this unit I don't think it matters - there isn't any side scan going on. It emits a cone and whatever is in that cone is shown on the screen. Orientation of the cone doesn't matter. With a display screen scrolling from right to left, we have no idea if the fish are swimming through the cone left to right, right to left, forward or backward. Unless I'm missing something - I'm open to corrections.

02-09-2015, 08:29 AM	#10
yak-fishing-socal kayak fishing socal Join Date: Nov 2013 Location: Southern California / Whittier Posts: 438	@old_rookie what way does your screen scroll?

02-10-2015, 07:34 AM	#12
old_rookie Senior Member Join Date: Mar 2010 Location: Santee Posts: 904	Yup - it scrolls right to left. And at a constant rate too, regardless of my paddling speed - not that I expect it to match.

02-10-2015, 09:51 AM	#13
YakDout Brandon Join Date: Jul 2011 Location: San Diego Posts: 2,345	You can however change the scroll speed on the HDS at least