Rigging Hobie Oasis Tandem & a Malibu Mini-X

[FishNinjaY]

I got a new Hobie Oasis Tandem, and took it out on the water 2 days ago. I also have a Malibu Mini-X Fish-n-Dive.. for solo adventures. I figure the large boat, the Oasis, will be fished solo with me in the back about 40% of the time, and the other times, will be with my son in front. We're both right-handed.

Mounts, Rails, Rod Holders?

I'd like to use the same fishfinder for both yaks. Thinking one of the Lowrance models?, and get 2 transducers to put 1 in each yak. Ideally, I thought a center position on a RAM mount arm, like the Lowrance Ram Mount would be good, but on the Hobe Oasis, there doesn't seem to be anywhere to place it in the center, unless it's right up against the forward seat back? I wonder if the Mirage Drive pedals and my knees & feet would be blocking my view of the screen? How do you guys have yours set up? I'm thinking I might need to mount it on my LEFT side instead? I struggled with the 2 molded in rod holders way behind me, and need to put some kind of extension tubes in those rear ones. (might also help if I get more flexible and less thick in the torso! )
Likely, I need something more forward, near my hands and rudder control areas, like rocket launchers or Scotty/RAM/Cannon rod holders? One on each side?

I think I'm pretty decided on installing some Yak Attack rails on the Hobie for sure, the narrower small profile ones? I think near the rear seat (mine), I'll put a 6" & 8" on each side, or maybe just a single 8" on each side.

Up near the Oasis front seat, which will usually be my 10-year old son (and hopefully eventually one or both of my younger daughters). I'm thinking just a 4" rail on either side.. mainly for some type of rod holder, like the Scotty or Cannon? Ideally, I would only put a center one and he could move it from side to side, but because of the Mirage drive well, there doesn't seem to be much center real estate to work with. The front hatch is way too forward for him to reach, so that's pretty much useless.

I think the Mini-X will be fine. I have a center cup holder I can put the Lowrance RAM Mount inside, or just in front of that. In front of the fishfinder mount, I can put a single Scotty or Cannon Rod holder which I can swing left or right. It might be a bit of a reach for me, and more so for my son.. not sure. I might not need any yak rails on either side. I already have 2 flush-mount rod holders front & back on each side (4 total). Unless you guys see something wrong about this plan, I think I'm probably set for the Mini-X. Yes?

Electronics:

Both yaks, I decided on a bow hatch battery in a Pelican Box or dry bag. I'd like to run TWO sets of wires back towards the main seat area. One wire set for the fishfinder. Another wire set to go towards the rear along the left side, for my livewell I'm making. Are there any special battery considerations? I was thinking of even a Pelican box, inside a drybag, suspended or velcroed up under the front hatch, and wires running back along the left side. The battery I have is a 12V 9Amp.. (courtesy of Raskal311 ) Can I run a Lowrance fishfinder, and my Livewell? My livewell will either have a Johnson 500-750gph pump, or the Rule 350 submersible pump, likely on an OEX timer to conserve power.

Transducers:

Hopefully, these won't be too expensive, but I'd like to get one for each yak, and just do the foam block Marine Goop install thru the hull. This way, I can just detach the main unit and move it from yak to yak. Reading here, it sounds like I want the 50/200 'ducer, right?

Fishfinder:

Which one should I get? (let the debate begin...)

OK... help me set up my yaks. I'd love to hear back, and see pics of what worked (and didn't) for you guys.

Teach me something before I start taking a drill to plastic!

[steveooo]

Here is how I had my Oasis rigged.

http://www.bigwatersedge.com/bwevb/s...ead.php?t=7760

In hind sight, i wish I hadn't sold it, particularly at that price

I used Ram mount balls & rocket launchers for the rodholders. They make the same balls that will attach to the YakAttack rails. I liked that they would all lay flat for transport, and I could rig them up for use. i wouldn't overthink the 4" vs 6" YakAttack thing. One thing that you will want to think about, is rigging the yak up with at least 1 paddle on, because you will always have that on board, and you dont want it getting in the way of any accessories.

When fishing tandem I'd keep the bait tank in back, when solo I'd keep it up front for ballast to keep the bow down. I used the same fishfinder between 2 yaks, just like you are describing.

For the fish finder, find one in your budget and go from there.

Good choice in Yaks. You'll have fun.

Steve

[FlyFishinYakr]

You know there's something you might have overlooked, I know I did!
RAM mounts make a sail mast wedge adapter for Hobies you can use for accessories. They come in both the 1" & 1.5" ball mounts, for what ever you might need & they're not that expensive.
I found this out too late after already having mounted a couple scotty rod mounts in the front of my Outback.
Sorry , but I have no suggestion for your FF dilemma.
I think you'll find the yak attack gear track very versatile.
FFY
btw; steveooo that tandem looked like a killer set-up!!!

[RedSledTeam]

This will take me a while to explain, so I'll just post photos and let you ask the questions...100_0123.jpg

DSC02690.jpg

P1000168.jpg100_0125.jpg

[theluckypig]

i fish my oasis from the front seat and it works better for me... try it

[FishNinjaY]

Hmm.. I might check out that center sail hole wedge RAM mount.. I just wonder if the FF screen mounted in center, in front of my pedals, might be too far for me to see clearly, esp in bright sunlight.

Originally Posted by theluckypig

i fish my oasis from the front seat and it works better for me... try it

Interesting.. I wondered about that. From the back seat, at 250lbs, the bow rides high, and there's some hull slap. I'll try the front. How does it steer/track?

Originally Posted by RedSledTeam

This will take me a while to explain, so I'll just post photos and let you ask the questions...Attachment 8731

Attachment 8732

Your fish-finder is on the right side, not in the middle. Why right side? or center? Do you enter from left side?

Attachment 8733

Looks like you have extenders in the 2 rear molded in rod holders, and 1 scotty rod holder on your left side, and a different type of scotty rod holder on right side of the front seat? Why these rod holder choices? vs the RAM launcher tubes? How often (or ever?) do you fish solo? Do you always fish from the rear seat? Ever pedal/fish from the front? What do you do with your livewell? I'm getting some great ideas here..

Thanks for the great pics and info!! (and.. nice fish!)