Question for Real Reel Experts!

[addicted2sp33d]

I recently inherited a Shimano Corvalus 301 (Lefty).

I really like the low profile size, but I noticed on the spec sheet that the drag maxes out at a weaksauce 11 lbs.

What are some ways that I can increase this max drag? Can I just add some drag discs, or is that max drag limited by something else?


In case anyone is wondering, the reel is very smooth, with very little play, and even though it is the lowest rung in the Shimano Round Baitcaster lineup, it's actually a very nice reel. It even has Levelwind and Shimano's VBS, in addition to static drag adjustments. On this particular model, the Levelwind mechanism disengages on the cast.

[oneyedeer]

what you be trying to fish? remember drag should be 33% or even 25% of your line weight depending on type of line and rod you using

carbontex drags is a start if you want an upgrade

[mtnbykr2]

I have had a few of these, they seem to be a pretty bullet proof reel,
unless you have a yard sale, which is what happened to mine, but sent them in to Shimano and they fixed them, one was bad enough I guess they sent me
a new one...beef up the drag and you are set....

[skrilla]

11# is plenty for a baitcaster.

I've had 2 of these reels that were upgraded to custom cut HT-100's (before Carbontex sets were available). They were great bassin' reels using 12-15# test. Never needed anymore drag even when hung up in the thick stuff.

[seriola_killer]

It's perfect for fishing the Calico's and Spotties, and even Halibut. If you are after YT and WSB, you may need to consider a different reel.

[lowprofile]

anything more will probably damage the reel. the "max drag" isn't always what it will be set to when buttoned down. i know i can lock down my calcutta 200GTB but the max drag is only like 9lbs. the max is the most a reel can be set and properly function.

besides, 11lbs is a 30lb line reel. load it up with braid and put a 25lb floro leader on it.