FS 2012 Hobie Pro Angler 14' - Kayak Fishing Adventures on Big Water’s Edge

wade · 07-22-2012, 10:24 AM

Selling my NEW 2012 Hobie Pro Angler Green 14'.
$2175 OBO

(3 months New, Bought in April 2012 @ Oceanside Dive & Kayak)
Still under warranty. Comes with all the original Owners manuals, Turbo Mirage Drive, The 3 Waterproof Plano boxes, cup holder, ect..
Currently dry docked @ Oceanside Marina.
PM or Email: Captainwade@hotmail

I took extreme care of this yak, from storing,launchings & landings, as I knew from the initial purchase I would be selling it within a few short months. I also specificially bought a Hudson sprayer just to give her a clean H20 wash down @ the beach 2 minutes after each landing, and once again including a full deck brushing @ my marina. Since my shoulder is now blown, i have never dragged the PA hull once. It was carried to the BIG waters edge upon the very few trips she has even made.

Custom wooden rails (capped) installed,
(Completly removable.)
(Under the wooden plugs are 3/16" stainless steel allen bolts.)
______________________________________________

PA Description:

Simply put, the Pro Angler 14 is a no-nonsense fishing boat.
The boat’s fishing specific hull form offers great stability, and its deck design is packed with the essentials – from an easy-to-reach cutting board, to the adjustable Cool Ride Seat, to space for 13 Plano® tackle boxes – for hundreds of perfect days afloat. The Pro Angler 14 carries six of your rods in its horizontal rod stowage area, and its voluminous bow and stern lockers and on-deck storage provide an impressive 600-pound payload.
The perfect boat for all fishing environments, from farm ponds to lakes to the open ocean.

Specifications

• Length: 13' 8" / 4.17 m
• Fitted Hull Weight: 110 lbs / 49.9 kgX
• Fully Rigged Weight: 138 lbs / 62.6 kgX
• Width: 38" / .97 m
• Capacity: 600 lbs / 272 kg
• Hull Construction: Rotomolded Polyethylene
Features

• MirageDrive with Turbo Fins
• Retractable Rudder System
• Horizontal Rod Storage for Six Rods
• Breathable Cool Ride Mesh Seat w/ High Back
• Extra Large Covered Bow Hatch with Liner
• Large Center Hatch w/ Cutting Board
• Mid-Ship Handles w/ Bungee® Tie-Downs
• Replaceable Mounting Boards
• Rear Cargo Area w/ Bungee® Tie Downs
• Molded-In Vertical Rod Storage
• Mesh-Covered Stowage Pockets
• Fixed Front and Rear Carrying Handles
• 8” Twist and Seal Hatches (patent pending) w/Gear Bucket
• Brand New Never used Hobie Paddle included.

Necron 99 · 07-22-2012, 03:50 PM

I get back from deployment in late August. If it ain't gone, I might want to pick it up, with all accessories. I'll be watching the posts to see if it is still around.

Thanks,
Dave

TJones · 07-22-2012, 04:50 PM

any opions on how that yak peddles compared to revo. is it a log like the outback? recently switched to revo . saccrifice stability for speed.

TJones · 07-22-2012, 04:53 PM

hope you are doing better. waiting for next video.

wade · 07-22-2012, 05:07 PM

Hey Dave,
sounds good..

________________________________________

Hey Mr Jones!
The PA in my opinion peddles just as smooth as the revo, no additional added power/pressure is noticable from pushing the larger hull design.
i have never been in a outback yet. the pa goes plenty fast, speed isnt hindered..

RE: (hope you are doing better. waiting for next video.)
im ok thanks,holdin' the best I can..

________________________________________

wade · 07-25-2012, 08:09 AM

bump!

wiredantz · 07-26-2012, 08:21 AM

Quote:

Originally Posted by wade

Hey Dave,
sounds good..

________________________________________

Hey Mr Jones!
The PA in my opinion peddles just as smooth as the revo, no additional added power/pressure is noticable from pushing the larger hull design.
i have never been in a outback yet. the pa goes plenty fast, speed isnt hindered..

RE: (hope you are doing better. waiting for next video.)
im ok thanks,holdin' the best I can..

________________________________________

Wade where the picture of the actual fish!!! u had me pumped

warfish · 03-15-2015, 10:37 AM

Still available??

Sent from my iPhone using Tapatalk

07-22-2012, 10:24 AM	#1
wade Senior Member Join Date: Jun 2009 Location: Oceanside Posts: 1,214	FS 2012 Hobie Pro Angler 14' Selling my NEW 2012 Hobie Pro Angler Green 14'. $2175 OBO (3 months New, Bought in April 2012 @ Oceanside Dive & Kayak) Still under warranty. Comes with all the original Owners manuals, Turbo Mirage Drive, The 3 Waterproof Plano boxes, cup holder, ect.. Currently dry docked @ Oceanside Marina. PM or Email: Captainwade@hotmail I took extreme care of this yak, from storing,launchings & landings, as I knew from the initial purchase I would be selling it within a few short months. I also specificially bought a Hudson sprayer just to give her a clean H20 wash down @ the beach 2 minutes after each landing, and once again including a full deck brushing @ my marina. Since my shoulder is now blown, i have never dragged the PA hull once. It was carried to the BIG waters edge upon the very few trips she has even made. Custom wooden rails (capped) installed, (Completly removable.) (Under the wooden plugs are 3/16" stainless steel allen bolts.) ______________________________________________ PA Description: Simply put, the Pro Angler 14 is a no-nonsense fishing boat. The boat’s fishing specific hull form offers great stability, and its deck design is packed with the essentials – from an easy-to-reach cutting board, to the adjustable Cool Ride Seat, to space for 13 Plano® tackle boxes – for hundreds of perfect days afloat. The Pro Angler 14 carries six of your rods in its horizontal rod stowage area, and its voluminous bow and stern lockers and on-deck storage provide an impressive 600-pound payload. The perfect boat for all fishing environments, from farm ponds to lakes to the open ocean. Specifications • Length: 13' 8" / 4.17 m • Fitted Hull Weight: 110 lbs / 49.9 kgX • Fully Rigged Weight: 138 lbs / 62.6 kgX • Width: 38" / .97 m • Capacity: 600 lbs / 272 kg • Hull Construction: Rotomolded Polyethylene Features • MirageDrive with Turbo Fins • Retractable Rudder System • Horizontal Rod Storage for Six Rods • Breathable Cool Ride Mesh Seat w/ High Back • Extra Large Covered Bow Hatch with Liner • Large Center Hatch w/ Cutting Board • Mid-Ship Handles w/ Bungee® Tie-Downs • Replaceable Mounting Boards • Rear Cargo Area w/ Bungee® Tie Downs • Molded-In Vertical Rod Storage • Mesh-Covered Stowage Pockets • Fixed Front and Rear Carrying Handles • 8” Twist and Seal Hatches (patent pending) w/Gear Bucket • Brand New Never used Hobie Paddle included. __________________

07-22-2012, 04:50 PM	#3
TJones Senior Member Join Date: Jan 2012 Posts: 2,526	question ? any opions on how that yak peddles compared to revo. is it a log like the outback? recently switched to revo . saccrifice stability for speed.

07-22-2012, 04:53 PM	#4
TJones Senior Member Join Date: Jan 2012 Posts: 2,526	p.s. hope you are doing better. waiting for next video.

07-22-2012, 05:07 PM	#5
wade Senior Member Join Date: Jun 2009 Location: Oceanside Posts: 1,214	Hey Dave, sounds good.. ________________________________________ Hey Mr Jones! The PA in my opinion peddles just as smooth as the revo, no additional added power/pressure is noticable from pushing the larger hull design. i have never been in a outback yet. the pa goes plenty fast, speed isnt hindered.. RE: (hope you are doing better. waiting for next video.) im ok thanks,holdin' the best I can.. ________________________________________ __________________

07-25-2012, 08:09 AM	#6
wade Senior Member Join Date: Jun 2009 Location: Oceanside Posts: 1,214	bump! __________________

07-22-2012, 03:50 PM	#2
Necron 99 Member Join Date: May 2012 Posts: 80	I get back from deployment in late August. If it ain't gone, I might want to pick it up, with all accessories. I'll be watching the posts to see if it is still around. Thanks, Dave

03-15-2015, 10:37 AM	#8
warfish Junior Join Date: Mar 2014 Posts: 13	Still available?? Sent from my iPhone using Tapatalk