|
07-09-2012, 12:45 PM | #1 |
Awesome Possum
Join Date: Aug 2011
Location: Riverside
Posts: 187
|
Bait reel rec?
Looking to spend under $200 for a YT/thresher/wsb setup for bait/jig toThinking of getting a saltist older model- heard lots of good things about their build quality and internal parts. Guy at turners was saying they were built as well as shimanos higher end model... Any others I should consider in that price point?
Thanks |
07-09-2012, 02:14 PM | #2 |
Senior Member
Join Date: Feb 2011
Location: Wrightwood
Posts: 623
|
My opinion is you can't find a more kayak friendly reel than a daiwa sealine. The 40 size has awesome height to width spool size for amazing casting. Plus they have enough power to tug in a tanker. Plus they price in under your range so you can afford spooling it with spectra.
|
07-09-2012, 03:11 PM | #3 |
Rookie of the Month Club
Join Date: Nov 2008
Location: Mira Mesa
Posts: 483
|
+1 on the Saltist. I like the 40!
__________________
they are getting bigger.... |
07-09-2012, 05:31 PM | #4 |
Member
Join Date: Mar 2012
Location: Eastvale
Posts: 94
|
This would be a great reel for what you want to do: http://www.bigwatersedge.com/bwevb/s...679#post124679
|
07-09-2012, 09:20 PM | #5 | |
Awesome Possum
Join Date: Aug 2011
Location: Riverside
Posts: 187
|
Quote:
|
|
07-09-2012, 10:20 PM | #6 |
Senior Member
Join Date: Feb 2011
Location: Wrightwood
Posts: 623
|
2 speeds are overkill on a kayak, but its your call. You really can't go wrong with a saltist 35 or 40 size.
|
07-09-2012, 10:54 PM | #7 |
Senior Member
Join Date: Sep 2006
Location: Bay Ho
Posts: 1,382
|
The Old Silver Saltist 40 (Star Drag) in 4.9:1 gear ratio is the one you want.
If you install a set of $15 carbotex drag washers, its as good as it gets. They are strong, and easy to service. The bearings can be changed out without having to use any tools (unlike the new ones). -They are made better than the new black ones in my opinion. The spool axle is thicker than the new black models, and its not crossed drilled creating a potential weak spot. Plus you can get the low gear ratio on the Old Silver Model (the new black ones are all 6.4:1) The cross drilled axle pin that retains the spool bearing can develop some corrosion. Then you must use a press pin tool to remove the retaining pin - because if you pound it out with the wrong tool you can bend the spool axle. -Then you will develop a wobble in the spool. If you find a used Silver Model buy it. The silver paint does tend to scratch, but who cares they are battle scars. I own 13 of them. ---------------------------------------------------- The Sealine 40 HA in 4.9:1 is another good choice for live bait. They are damn tough reels, and will survive the kayak environment better than most any reel. -If you pack/and surround the outside handle bearing with grease its bulletproof. On Sale Cheap @ Charkbait San Diego right now. Its an unadvertised IN Store Special, call Mike and tell him your from BWE.
__________________
Last edited by Billy V; 07-09-2012 at 11:20 PM. |
07-10-2012, 07:50 AM | #8 |
Senior Member
Join Date: Apr 2011
Posts: 110
|
The 2 speed is a little overkill for the yak, but with that said, I have the 35 2 Speed and love it. I have also dropped down to low gear also a couple times trying to pull a fish out of the kelp... and it has helped. I also have the 30 single speed. Both bad ass reels and I love them. I also like the lever drag vs star drag for fishing bait. If I were adding to my arsenal, I wouldn't hesitate to get another saltist.
|
07-10-2012, 08:25 AM | #9 |
Senior Member
Join Date: Sep 2009
Location: Cmont []
Posts: 314
|
I love my saltist! But I also love my sealine which i took tuna fishing and after the carbontex drag upgrade it had buttery smooth drag! i reeled up some footballs no problem. Just because the sealine is cheap; does not mean it isn't a great reel. But I lean towards the saltist.
__________________
"It depends on what the meaning of the words 'is' is." –Bill Clinton |
07-10-2012, 10:23 AM | #10 | |
Senior Member
Join Date: Sep 2006
Location: Bay Ho
Posts: 1,382
|
Quote:
-------------------------------- - andrewtp - I spoke with Mike this morning about the special sale price on the Sealine. He said, although the sale ended on Sunday he would honor the price if you were interested. No pressure if you aren't interested - but I will PM you the price.
__________________
|
|
07-10-2012, 05:54 AM | #11 | |
Senior Member
Join Date: Jun 2011
Location: Too far from the launch.
Posts: 443
|
Quote:
|
|
|
|