For those with Livewell pumps on Stealth series

Is your setup really noisy? Mine is, to the point where I refuse to use it. I pull the drian plug and put a screen in the scupper hole to prevent escapes. I'm just wondering if I have a defective pump?

It works fine, but it sounds like a blender. I checked the inlet, and there is nothing clogging it, and no kinks in the tubing. It sounds more like cavitation vibration than something going on with the impeller.
It much quieter when its out of the water

[RK]

Had one, a good reliable, maintenance free fairly quiet pump, quieter than the hobie bait tanks thats for sure. But im sort of getting used to the gurgling bong overflow drain, although the same tsunami pump, super easy to clean and take apart. If its a tiny bit nosiy thats normal if its enough noise to really bother you and make you wonder if its spooking wsb then i think a new ones about thirty bucks.

[fishsouthcounty]

I have a stealth 12 and my pump is pretty quiet, don't really notice it when its on, that is if it works. Which it usually doesn't work properly.

[hook1fred]

Originally Posted by RK

Had one, a good reliable, maintenance free fairly quiet pump, quieter than the hobie bait tanks thats for sure. But im sort of getting used to the gurgling bong overflow drain, although the same tsunami pump, super easy to clean and take apart. If its a tiny bit nosiy thats normal if its enough noise to really bother you and make you wonder if its spooking wsb then i think a new ones about thirty bucks.

My hobie LW is very quiet I normally have to check to see if it's still on.... now it it weren't so difficult to prime i'd be golden

[dsafety]

Originally Posted by hook1fred

My hobie LW is very quiet I normally have to check to see if it's still on.... now it it weren't so difficult to prime i'd be golden

I found a way to easily prime a Hobie tank. The solution will probably work with any scupper-fed pump. Check out post number 36 in the Innovations thread. After adding the angle adapter shown in that post, simply carry a piece of pipe, (I use a sprinkler riser), that will fit in the plastic tubing.

If your intake ever gets plugged up, blow some air through the system. If you cannot get the pump to prime, suck a little water in. This thing works great.

Bob

[RK]

Not to thread jack but ive gotta know, the tsunami pump (same as stealth) in the hobie tank on mine is quiet but the tank itself with that white overflow drain pipe makes a loud gurgling sound like a bong, not that I dont like this sound but it is a bit noisy, definatley loud enough for me to bring up, now do you guys not experience that, im wondering if theres a may to silence that?

[Handymansd]

Originally Posted by RK

Not to thread jack but ive gotta know, the tsunami pump (same as stealth) in the hobie tank on mine is quiet but the tank itself with that white overflow drain pipe makes a loud gurgling sound like a bong, not that I dont like this sound but it is a bit noisy, definatley loud enough for me to bring up, now do you guys not experience that, im wondering if theres a may to silence that?

I drilled 4 3/8" holes at the top of my tube so that the water does not "bubble" quite as loudly... still not as silent as a kayatank but is far better than it was.