Ideas / Suggestions for downsizing from PA? - Kayak Fishing Adventures on Big Water’s Edge

alfsteur · 03-09-2017, 10:40 AM

Hi y'all, apologize if this topic has been posted before!

I have a 2014 PA12 with upgraded turbo v2 fin with glide tech, this beast has a loaded weight of 130lb -140lb when fully rigged. Problem is this is starting to get too heavy & sluggish on the water for me, so want to check with BWE community for ideas or suggestions to lighten and/or downsizing from a PA12.

I'm looking for reducing overall loaded weight, and gain more maneuverability/speed if possible. So 2 questions:
1. What can i do to lighten the load by 20~30lb?
2. if downsizing, what do you suggest? I'm currently considering going back to a Hobie Outback... but that's still 100lb+ when fully loaded for YT fishing

Thanks in advance!
Alfsteur

makobob · 03-09-2017, 10:52 AM

Quote:

Originally Posted by alfsteur

Hi y'all, apologize if this topic has been posted before!

I have a 2014 PA12 with upgraded turbo v2 fin with glide tech, this beast has a loaded weight of 130lb -140lb when fully rigged. Problem is this is starting to get too heavy & sluggish on the water for me, so want to check with BWE community for ideas or suggestions to lighten and/or downsizing from a PA12.

I'm looking for reducing overall loaded weight, and gain more maneuverability/speed if possible. So 2 questions:
1. What can i do to lighten the load by 20~30lb?
2. if downsizing, what do you suggest? I'm currently considering going back to a Hobie Outback... but that's still 100lb+ when fully loaded for YT fishing

Thanks in advance!
Alfsteur

To reduce weight by 20-30 pounds get the extra tackle gone. If you carry the kitchen sink in your tackle box it adds up fast, reduce rods and reels, do you really need 4-5 outfits If so you will always overweight. DOWN SIZE. As to yak, most now approach 100#, and the OUTBACK is hard to beat now specically with the 180 drive. Fast, manurverable,and stable.

ronbo613 · 03-09-2017, 11:39 AM

If you keep the PA 12, all you can really do is lose gear(or start Nutraslim). I have to carry my kayak and all the gear down a cliff, dark in the mornings, and back up after a day of fishing, so I've cut my stuff to the bare minimum. Believe me, you can shed a lot of gear.

NICKWORN · 03-09-2017, 12:16 PM

Quote:

Originally Posted by alfsteur

Hi y'all, apologize if this topic has been posted before!

I have a 2014 PA12 with upgraded turbo v2 fin with glide tech, this beast has a loaded weight of 130lb -140lb when fully rigged. Problem is this is starting to get too heavy & sluggish on the water for me, so want to check with BWE community for ideas or suggestions to lighten and/or downsizing from a PA12.

I'm looking for reducing overall loaded weight, and gain more maneuverability/speed if possible. So 2 questions:
1. What can i do to lighten the load by 20~30lb?
2. if downsizing, what do you suggest? I'm currently considering going back to a Hobie Outback... but that's still 100lb+ when fully loaded for YT fishing

Thanks in advance!
Alfsteur

Trade for my 2011 Outback! Bam problem solved!!!

Orca Winfrey · 03-09-2017, 12:55 PM

Or you can get a Revo.

King Saba · 03-09-2017, 01:07 PM

Still heavy if you bring 30lbs of crap

Andy · 03-09-2017, 01:42 PM

I went from the PA12 to a Revo. Downsize your bait tank to three gallons, only bring what you need.

King Saba · 03-09-2017, 02:57 PM

Quote:

Originally Posted by Andy

I went from the PA12 to a Revo. Downsize your bait tank to three gallons, only bring what you need.

3 gallons? What kind of bait tank do you have running?

Orca Winfrey · 03-09-2017, 02:03 PM

Quote:

Originally Posted by King Saba

Still heavy if you bring 30lbs of crap

Ok fine!! I'll only bring 5 rods this weekend instead of my usual 7.

King Saba · 03-09-2017, 03:14 PM

Quote:

Originally Posted by Orca Winfrey

Ok fine!! I'll only bring 5 rods this weekend instead of my usual 7.

lol that isn't the problem, it's the 30lbs of sinkers and plastics that you bring.

flemdogg · 03-09-2017, 02:10 PM

I am thinking of downsizing from a PA as well. Revo16 if I do.

diedroid · 03-09-2017, 02:59 PM

Slayer Propel 12LT seems pretty light.

http://nativewatercraft.com/product/...-propel-12-lt/

alfsteur · 03-10-2017, 07:45 AM

Quote:

Originally Posted by diedroid

Slayer Propel 12LT seems pretty light.

http://nativewatercraft.com/product/...-propel-12-lt/

Thanks for the suggestion, this looks really promising! Did consider Native boats before i jumped into a Hobie, but now I'm gonna to check OEX Mission Bay to see if they carry this! Anyone else has tried this boat?

jorluivil · 03-10-2017, 09:13 AM

You won't gain much speed by moving into a smaller kayak.

I went from an Outback to a PA 14 and despite the fact that the PA is larger and heavier it moves through the water better than my outback. Unless your average fishing trip is 15-20 miles+ I would suggest you stay with what you have and deal with it.

Baja_Traveler · 03-10-2017, 09:40 AM

Have to remember - speed comes at a price, and that's stability...

I love paddling my touring kayak, its faster than blazes, but I'd never try to reach behind me while doing it or I'd be brushing up on my Eskimo Roll technique!

absentx · 03-10-2017, 07:44 PM

I think you would love the outback.

Now, don't get me wrong - its a beast too - but in conjunction with the trailer I built for it and a bit of smart loading and unloading, I can usually minimize carrying or having to severely manhandle the thing.

Basically I am able to angle it off my trailer, slide it down at the landing/beach/lake whatever, and then just carry my stuff to it, push into the water and go.

Its a nice stable boat too. I flipped mine once and it was a very extreme circumstance. I ended up completely broadside in a river with about a four mph current and managed to hit one tiny log sticking above the surface right in the middle of the side of my hull, plus said log was pointing right at my angle of attack. This was 100% my fault as I let the boat get broadside...

paddle man · 03-11-2017, 10:37 AM

I BOUGHT A NEW P.A. 12 LAST YR USED IT 3 TIMES FOUND OUT THAT IT'S TO MUCH YAK FOR ME LOADIND & UNLOADING THIKING OF SELLING AND GETING OUTBACK WILL BE A LITTLE LIGHTER AND NOT AS WIDE GETING OLDER

alfsteur · 03-13-2017, 09:44 AM

Thanks y'all for the suggestions & input, I also talked to Fastlane not too long ago, they suggested hitting Fred Hall to see new yaks & possibly good deals... can't wait to see all the new toys that I cannot buy!

jorluivil · 03-13-2017, 09:47 AM

Quote:

Originally Posted by alfsteur

Thanks y'all for the suggestions & input, I also talked to Fastlane not too long ago, they suggested hitting Fred Hall to see new yaks & possibly good deals... can't wait to see all the new toys that I cannot buy!

That F word is NOT to be used in this site

YakDout · 03-14-2017, 07:54 AM

Im also considering the revo 16.

03-09-2017, 10:40 AM	#1
alfsteur Senior Member Join Date: Feb 2013 Location: San Diego Posts: 128	Ideas / Suggestions for downsizing from PA? Hi y'all, apologize if this topic has been posted before! I have a 2014 PA12 with upgraded turbo v2 fin with glide tech, this beast has a loaded weight of 130lb -140lb when fully rigged. Problem is this is starting to get too heavy & sluggish on the water for me, so want to check with BWE community for ideas or suggestions to lighten and/or downsizing from a PA12. I'm looking for reducing overall loaded weight, and gain more maneuverability/speed if possible. So 2 questions: 1. What can i do to lighten the load by 20~30lb? 2. if downsizing, what do you suggest? I'm currently considering going back to a Hobie Outback... but that's still 100lb+ when fully loaded for YT fishing Thanks in advance! Alfsteur

03-09-2017, 11:39 AM	#3
ronbo613 Waterman At Large Join Date: Oct 2006 Location: On the Water Posts: 199	If you keep the PA 12, all you can really do is lose gear(or start Nutraslim). I have to carry my kayak and all the gear down a cliff, dark in the mornings, and back up after a day of fishing, so I've cut my stuff to the bare minimum. Believe me, you can shed a lot of gear. __________________ Kayak Fishing Photos and Video

03-09-2017, 01:07 PM	#6
King Saba Senior Member Join Date: Nov 2014 Location: SGV Posts: 848	Still heavy if you bring 30lbs of crap __________________ Baitfish catcher extraordinaire

03-09-2017, 02:10 PM	#11
flemdogg Island Blood Join Date: May 2013 Location: Murrieta Posts: 237	I am thinking of downsizing from a PA as well. Revo16 if I do. __________________ These are my express opinions derived from my experiences - I know less than most and half as much as some!

03-10-2017, 09:13 AM	#14
jorluivil Senior Member Join Date: Apr 2010 Posts: 6,856	You won't gain much speed by moving into a smaller kayak. I went from an Outback to a PA 14 and despite the fact that the PA is larger and heavier it moves through the water better than my outback. Unless your average fishing trip is 15-20 miles+ I would suggest you stay with what you have and deal with it. __________________ www.facebook.com/Teamsewer Last edited by jorluivil; 03-10-2017 at 11:08 AM.

03-09-2017, 12:55 PM	#5
Orca Winfrey Senior Member Join Date: Sep 2015 Location: The I. E. Posts: 353	Or you can get a Revo.

03-09-2017, 01:42 PM	#7
Andy Member Join Date: May 2007 Location: Huntington Beach Posts: 51	I went from the PA12 to a Revo. Downsize your bait tank to three gallons, only bring what you need.

03-09-2017, 02:59 PM	#12
diedroid Junior Join Date: Oct 2015 Location: OC Posts: 26	Slayer Propel 12LT seems pretty light. http://nativewatercraft.com/product/...-propel-12-lt/

03-10-2017, 09:40 AM	#15
Baja_Traveler Senior Member Join Date: Nov 2005 Location: Table 17, Bay Park Fish Co. Posts: 943	Have to remember - speed comes at a price, and that's stability... I love paddling my touring kayak, its faster than blazes, but I'd never try to reach behind me while doing it or I'd be brushing up on my Eskimo Roll technique!

03-10-2017, 07:44 PM	#16
absentx Member Join Date: Aug 2012 Posts: 47	I think you would love the outback. Now, don't get me wrong - its a beast too - but in conjunction with the trailer I built for it and a bit of smart loading and unloading, I can usually minimize carrying or having to severely manhandle the thing. Basically I am able to angle it off my trailer, slide it down at the landing/beach/lake whatever, and then just carry my stuff to it, push into the water and go. Its a nice stable boat too. I flipped mine once and it was a very extreme circumstance. I ended up completely broadside in a river with about a four mph current and managed to hit one tiny log sticking above the surface right in the middle of the side of my hull, plus said log was pointing right at my angle of attack. This was 100% my fault as I let the boat get broadside...

03-11-2017, 10:37 AM	#17
paddle man Member Join Date: Jun 2011 Posts: 81	I BOUGHT A NEW P.A. 12 LAST YR USED IT 3 TIMES FOUND OUT THAT IT'S TO MUCH YAK FOR ME LOADIND & UNLOADING THIKING OF SELLING AND GETING OUTBACK WILL BE A LITTLE LIGHTER AND NOT AS WIDE GETING OLDER

03-13-2017, 09:44 AM	#18
alfsteur Senior Member Join Date: Feb 2013 Location: San Diego Posts: 128	Thanks y'all for the suggestions & input, I also talked to Fastlane not too long ago, they suggested hitting Fred Hall to see new yaks & possibly good deals... can't wait to see all the new toys that I cannot buy!

03-14-2017, 07:54 AM	#20
YakDout Brandon Join Date: Jul 2011 Location: San Diego Posts: 2,345	Im also considering the revo 16.