Technical question regarding interfering signals.... - Kayak Fishing Adventures on Big Water’s Edge

Fomen · 05-25-2017, 02:23 PM

So I have a technical question for you guys. Let me know if any of you have ever encountered this scenario.

My buddy and I both have Lowrance Chirp sonars on our kayaks. I have an older Elite4x Chirp and he has a brand new Hook4. If we are paddling within several feet of each other, and we are both running the chirp (or even just the sonar) functions on the FF's, will the signals interfere with each other? Will the tracking display for the bottom contours get distorted because the systems are confusing each others signals? If so, how close can you be to similar units without this happening? I realize it's not a huge deal, and we can probably just stay 20' apart or so. I'm just curious if anyone on here has ever experienced anything like this. Thanks guys....

Amish Ed · 05-25-2017, 02:29 PM

MY buddy and I both have Lowrance Elites. If we are close I get vertical lines running at a slight diagonal. I can still see the bottom.

Fomen · 05-25-2017, 04:33 PM

Thanks Ed. I thought for sure if we were too close it would have to create some sort of interference. Especially if they are like units, and they are operating on on identical frequencies.

Saba Slayer · 05-25-2017, 06:33 PM

Yes you will get intereference between the two units if you are too close.

goldenglory18 · 05-26-2017, 06:54 AM

+1

It's basically the equivalent of audio feedback....

chris138 · 05-26-2017, 04:27 PM

you can get interference from a lot more than 20' away... there are a few things you can do.

1. have one person run 83kHz, and the other person run "mid chirp". This will still produce some feedback, but it will lessen it.

2. turn up the "noise rejection" filter on your units.

3. If you want to work an area close together, have one person run 83 and the other run 200 kHz.

All said, you can still read the returns through the feedback. After you stare through the feedback for several hours, you hardly notice it.

TJones · 09-12-2017, 04:03 PM

lots of articles on internet regarding this situation.

05-25-2017, 02:23 PM	#1
Fomen Member Join Date: Aug 2015 Posts: 40	Technical question regarding interfering signals.... So I have a technical question for you guys. Let me know if any of you have ever encountered this scenario. My buddy and I both have Lowrance Chirp sonars on our kayaks. I have an older Elite4x Chirp and he has a brand new Hook4. If we are paddling within several feet of each other, and we are both running the chirp (or even just the sonar) functions on the FF's, will the signals interfere with each other? Will the tracking display for the bottom contours get distorted because the systems are confusing each others signals? If so, how close can you be to similar units without this happening? I realize it's not a huge deal, and we can probably just stay 20' apart or so. I'm just curious if anyone on here has ever experienced anything like this. Thanks guys....

05-25-2017, 02:29 PM	#2
Amish Ed Senior Member Join Date: Jun 2005 Location: Grants Pass, OR Posts: 1,903	MY buddy and I both have Lowrance Elites. If we are close I get vertical lines running at a slight diagonal. I can still see the bottom. __________________ Amish Ed You can't catch it again if it's dead!

05-25-2017, 04:33 PM	#3
Fomen Member Join Date: Aug 2015 Posts: 40	Interesting Thanks Ed. I thought for sure if we were too close it would have to create some sort of interference. Especially if they are like units, and they are operating on on identical frequencies.

05-25-2017, 06:33 PM	#4
Saba Slayer Senior Member Join Date: May 2007 Location: Palos Verdes Posts: 1,855	yes Yes you will get intereference between the two units if you are too close. __________________ Jim / Saba Slayer

09-12-2017, 04:03 PM	#7
TJones Senior Member Join Date: Jan 2012 Posts: 2,526	cross talk lots of articles on internet regarding this situation.

05-26-2017, 06:54 AM	#5
goldenglory18 Senior Member Join Date: Feb 2015 Location: Seattle Area Posts: 861	+1 It's basically the equivalent of audio feedback....

05-26-2017, 04:27 PM	#6
chris138 donkey roper Join Date: Apr 2009 Location: Pacific Beach Posts: 968	you can get interference from a lot more than 20' away... there are a few things you can do. 1. have one person run 83kHz, and the other person run "mid chirp". This will still produce some feedback, but it will lessen it. 2. turn up the "noise rejection" filter on your units. 3. If you want to work an area close together, have one person run 83 and the other run 200 kHz. All said, you can still read the returns through the feedback. After you stare through the feedback for several hours, you hardly notice it.