Rectangle hatch install question - Kayak Fishing Adventures on Big Water’s Edge

SHRED · 07-10-2017, 12:41 PM

As I ponder installing a rectangle hatch on my yet to be purchased Outback (2017 or 2018) I've seen where some people have installed their rectangle hatch lengthwise with the kayak.
The claim is that the hatch can be opened while peddling without interference.

Has anyone here done this and how did it work for you?

Mahigeer · 07-10-2017, 03:37 PM

I plan to install one soon. The way is shown in most YouTube videos.

I don't see any advantage of being able to paddle while the hatch is open.

It seems to me that all hatches should be kept close while on the way to prevent sudden flooding by an unexpected wave.

octico · 07-10-2017, 03:39 PM

I had Andy install mine, I did traditional style. You won't regret it. Just geter done!

Mr. NiceGuy · 07-10-2017, 06:02 PM

Octico, do you have to twist your legs out of the way to get the lid open?

What year is your kayak?

I was looking at newer year Outbacks yesterday with the same thought in mind -- they have a flatter deck with more space than my 2014 Outback. A rectangular hatch will fit on a 2014, but there is not much of a margin around the edges.

Mahigeer · 07-10-2017, 08:53 PM

Another issue to consider is if the basket is going to fit properly.

The tackle box holder may fit easier.

I am hoping to be able to fit the basket in my 2013 Outback.

paddle man · 07-11-2017, 07:14 AM

YES THEY WILL FIT IF PROPERLY INSTALLED MAKE SURE SIDE TO SIDE MEASUREMENTS ARE EQUEL ON YAK EVER WHO INSTALLED MINE WAS OFF HAD TO MODIFIE BUCKEIT TO CLOSE LID BUCKET WAS HITING INSIDE RIB OF YAK 2016 OUTBACK

07-10-2017, 12:41 PM	#1
SHRED Member Join Date: Jul 2011 Location: Encinitas (Leucadia), CA Posts: 94	Rectangle hatch install question As I ponder installing a rectangle hatch on my yet to be purchased Outback (2017 or 2018) I've seen where some people have installed their rectangle hatch lengthwise with the kayak. The claim is that the hatch can be opened while peddling without interference. Has anyone here done this and how did it work for you?

07-10-2017, 06:02 PM	#4
Mr. NiceGuy Manic for Life Join Date: May 2015 Location: San Diego Posts: 839	Octico, do you have to twist your legs out of the way to get the lid open? What year is your kayak? I was looking at newer year Outbacks yesterday with the same thought in mind -- they have a flatter deck with more space than my 2014 Outback. A rectangular hatch will fit on a 2014, but there is not much of a margin around the edges. __________________ Another ho-hum day in Paradise

07-10-2017, 03:37 PM	#2
Mahigeer Senior Member Join Date: Apr 2013 Location: Los Angeles Posts: 1,891	I plan to install one soon. The way is shown in most YouTube videos. I don't see any advantage of being able to paddle while the hatch is open. It seems to me that all hatches should be kept close while on the way to prevent sudden flooding by an unexpected wave.

07-10-2017, 03:39 PM	#3
octico Senior Member Join Date: Mar 2014 Location: The city of Orange Posts: 1,278	I had Andy install mine, I did traditional style. You won't regret it. Just geter done!

07-10-2017, 08:53 PM	#5
Mahigeer Senior Member Join Date: Apr 2013 Location: Los Angeles Posts: 1,891	Another issue to consider is if the basket is going to fit properly. The tackle box holder may fit easier. I am hoping to be able to fit the basket in my 2013 Outback.

07-11-2017, 07:14 AM	#6
paddle man Member Join Date: Jun 2011 Posts: 81	YES THEY WILL FIT IF PROPERLY INSTALLED MAKE SURE SIDE TO SIDE MEASUREMENTS ARE EQUEL ON YAK EVER WHO INSTALLED MINE WAS OFF HAD TO MODIFIE BUCKEIT TO CLOSE LID BUCKET WAS HITING INSIDE RIB OF YAK 2016 OUTBACK