|
10-12-2015, 08:21 AM | #1 |
Senior Member
Join Date: Aug 2015
Location: Yucaipa, CA
Posts: 1,136
|
Gaff length
What is the best length for the gaff on a kayak? I'm thinking 18 to 24 inches in case you have to reach out a little. Most of the videos I've watched seems to show gaffs about that length.
|
10-12-2015, 09:21 AM | #2 |
Senior Member
Join Date: May 2007
Location: Chula Vista
Posts: 1,589
|
My gaffs are around 36" long. That's maybe longer than needed but its comfortable for me. It seams like no matter what length a gaff is you always want to reach and lean toward the fish. Mike
|
10-12-2015, 10:28 AM | #3 |
Emperor
Join Date: May 2009
Location: Buena Park
Posts: 3,649
|
24" gaff is perfect for me.
__________________
There's nothing colder than yesterday's hotdog. |
10-12-2015, 10:33 AM | #4 |
Senior Member
Join Date: Jun 2014
Location: East County San Diego
Posts: 657
|
My old gaff was around 24" and I just built a new one at around ~36". I wanted a longer gaff for me personally, because I've had some situations where I've needed to extend further to reach a fish in the kelp.
|
10-12-2015, 10:52 AM | #5 |
Senior Member
Join Date: Jun 2011
Location: San Diego
Posts: 664
|
I use a 2ft cause I sit low. I get requested longer for guys sitting higher in wider kayaks.
__________________
Urban Camo Trident 13 |
10-13-2015, 11:58 AM | #6 |
Manic for Life
Join Date: May 2015
Location: San Diego
Posts: 839
|
32" is not at all uncomfortable for my Outback. I have not tried 24" but that makes sense too.
You can buy a 3' gaff on a wooden pole and cut it down to whatever feels good to you. Squidco has simple wood pole gaffs for reasonable prices. http://www.squidcofishing.com/WOOD-HANDLE-GAFF_c9.htm Squidco prices are so reasonable you can buy both and keep the other as a backup, or give it away as a gift.
__________________
Another ho-hum day in Paradise Last edited by Mr. NiceGuy; 10-13-2015 at 09:15 PM. |
10-13-2015, 03:01 PM | #7 |
Senior Member
Join Date: Apr 2013
Location: Los Angeles
Posts: 1,891
|
My gaff is an adjustable, floating one.
Best of all worlds. About $40.00 including tax if I recall correctly. |
10-14-2015, 07:00 PM | #8 |
Senior Member
Join Date: May 2014
Location: Fort Lauderdale
Posts: 1,933
|
I would probably think differently if I did not have the 6 rod tubes on the PA14, but since I do, I like to have a long light gaff. I have been experimenting with different lengths, and so far like 5'. I also prefer to buy a stainless steel hook and grind it barbless rather than buy the galvanized gaff hooks that will rust out eventually. I use light bamboo, so that if I drop the gaff it will float. Only fault to bamboo is strength....have to be mindful and gaff near the head. Mid body and aft shots can snap light bamboo on bigger fish.
|
10-14-2015, 09:25 PM | #9 |
Manic for Life
Join Date: May 2015
Location: San Diego
Posts: 839
|
Bamboo looks cute and artistic, and it seems to be traditional.. They can be beautiful hanging on the wall as a decoration.
Maybe if I needed something extra long to reach from the deck of a boat high off the water, bamboo might be a cheap and reasonable material? Personally, I would prefer the strength of something like a shovel handle or other tool-quality hardwood. I wonder how "Calcutta Bamboo" ever became a popular standard in the first place? It's only bamboo. Bamboo fishing rods once had their time and place too, but I think that time has passed.
__________________
Another ho-hum day in Paradise |
|
|