|
12-17-2010, 07:59 AM | #1 |
Senior Member
Join Date: Mar 2008
Posts: 611
|
Revo dilemma
I am thinking of graduating from the Outback and moving up to the Revo...
I just have one, to me, huge issue bugging the crap outa me... on the Outback, I have 6 flushmount rod holders built in... two front, four rear... it seems impossible to do this on the Revo, thus forcing me to have to have bait tank or a crate if I want more than two rods with me... I rarely (almost never) use a bait tank...usually only when I come down to LJ...and can't stand the thought of being forced to shlep a bait tank everytime out...so...what are my options? question 2... on my Outback, I have the transducer installed betrween the sail mast and the pedal well, in front of the pedals... I have seen a few guys install their transducer under their seat... I am contemplating installing a thru hull TX like Bing, Sunburn, and Stevoo did...my concern is this... if the TX is under your butt, behind the pedals, do you get interferance from the bubbles created by the pedals? the reason I ask is it seems like the hull is not flat enough to do the thru hull install between the mast and pedal well, too mush of a radius, and it also seems like it would take away some strength to put it there. thanks in advance for you responses. |
12-17-2010, 08:14 AM | #2 |
Senior Member
Join Date: Jul 2006
Location: Fullerton
Posts: 1,360
|
Question 1 - does your seat have rod holders, or is there one that will fith the hobie that does?
Question 2 - I love my thru hull mount. Are you usually cruising full speed when looking for fish/structure or do you slow down a bit? Would seem that if this becoms an issue you could either slow down a bit or make some kind of very small dam to deflect the bubbles from the ducer (I know, not ideal) Way to get the lake guys on the salt, btw. |
12-17-2010, 09:03 AM | #3 |
Administrator
Join Date: Mar 2005
Location: 1-2 miles off the point
Posts: 6,948
|
ya gotta give up some luxury to save some gas............SUV to crossover
__________________
|
12-17-2010, 09:07 AM | #4 | |
.
Join Date: May 2010
Posts: 1,155
|
i know this is no help but curious as to why you are switching to the revo?
i have a outback too. i thought i had a hard decision when i first started looking but now i know for me i made the right choice. for me storage and working space makes up for it's shortcoming compared to the revo. Quote:
__________________
|
|
12-17-2010, 10:12 AM | #5 |
Leo
Join Date: Feb 2010
Location: La Jolla, CA
Posts: 482
|
Tell you the true, I got the small brother of the outback (sport) for 4 years and I'm very happy with it, I got 5 rod holders only use 3 rod no need for more & if you looking for speed, forget it, they all run the same the faster you peddler the faster you'll go. I do like Revo, but for fishing the the outback or the sport.
|
12-17-2010, 10:27 AM | #6 |
Member
Join Date: May 2008
Location: Sorrento Valley_SD
Posts: 40
|
I have question #3 to add to this discussion, because I am considering the Revo over the outback. Does the Revo handle beach launches/landings better than the Outback. I am talking 2 to 4 ft surf breaks, which my prowler13 handles pretty well.
|
12-17-2010, 10:52 AM | #7 |
Daddeo
Join Date: Jul 2010
Location: OC
Posts: 660
|
Big Brother Outfitter
Good put Leo! I have the "Big" Brother to the Outback, the "Outfitter Tandem" and it works great for my Son and I. We have surfed 2-3 ft waves coming in at La Jolla and for a Tandem it does great! (need a pedal surfer moticon!) Launching is even better because I can have Roman start pedaling before I get in the yak so that we have speed and momentum going through the surf as long as he doesn't get excited and leave me behind!
For Speed we have the Turbo fins and we move fast enough to throw a pretty good wake. I haven't clocked the speed yet but I think we're doing about 5-7 knots max. Stability of the Outfitter is excellent and there are well placed tackle trays on the gunnels. We use a large pet-tainer baittank with eight rod holders on it and there are also 4 more built-in rod holders in the hull. I do have to regulate the water level to about 4-5 inches so that we don't exceed the weight limit of the vessel. Overall, we love our Outfitter, but we're looking at the TI for the future. Hope this info helps. |
12-17-2010, 10:59 AM | #8 | |
Senior Member
Join Date: Jan 2009
Location: Rancho Cucamonga
Posts: 753
|
Quote:
I have the perfect TI for ya...Only used twice. I have a potential buyer that's taking it out Sunday for a demo. If it falls through, come take this beast off my hands so I can get my ass back into a REVO!
__________________
GO ARMY BEAT NAVY! Bad decisions make great stories! |
|
12-17-2010, 11:19 AM | #9 |
Olivenhain Bob
Join Date: May 2008
Location: Olivenhain, CA
Posts: 1,121
|
I can't comment from experience on the through-hull transducer mount but my biggest concern would be related to being locked in to a particular brand of FF down the road. If you cut a hole to mount a Lowrance transducer, you will be locked in to that brand forever. What about if your transducer fails and you have to replace it. Will the new one fit? Patching a hole that size might be a challenge.
Since the wet and grease mount methods work quite well, it seems to me that using one of these methods might be more practical. Regarding the rod holder question, the Revo only has two molded rod holders and they are placed in a less than perfect location. I always take my bait tank which gives me storage for up to five rods. I made a couple of adjustable rod holders that fit into the molded holes, (see the post in the Innovations thread). This gives me plenty of rod storage capability and puts my active rods in a more usable location. If you don't want to pack along a bait tank but need more rod storage on a Revo, my suggestion would be to modify my rod holder design by adding a cross bar behind the seat. Using ABS or PVC fittings you could add a bunch of extra rod holders that extend off of the cross bar. It would be easy to build, inexpensive and probably work very well. Bob Last edited by dsafety; 12-17-2010 at 12:56 PM. |
12-17-2010, 03:34 PM | #10 | |
Senior Member
Join Date: Sep 2005
Posts: 1,921
|
Quote:
Question 1- Maybe try a Rhyno Bar with 2 or 3 legit west marine rodholders mounted on it. I think Andy has a pic somewhere of a tarpon that he did that to. Sweet set up if you don't regularly carry a bait tank. Question 2- I have a through hull. The picture is nice, and you get a true water temp. Had it for a couple years with no leaks. I have it mounted kinda just under my seat. I don't notice any disturbance from the mirage drive when i am under way. The way i see it, normal boats are using these things running at 20+ mph and getting good readings. If I'm cruising along at 6 mph, I highly doubt there will be enough disturbance to distort the signal. If it did, it would only affect the top few inches of water, which I don't typically fish in anyways. For the ducer, I would mount it in the flattest area possible, that doesn't get dragged on the ground much during launches/landings. |
|
12-17-2010, 04:03 PM | #11 |
Member
Join Date: May 2010
Posts: 60
|
I doubt there are many revo owners who have not at some point wished for the gunwhale space and rod holders on an outback. I know I have.
We should just form a hobie co-operative, and pass the models around. Way cheaper |
12-17-2010, 04:07 PM | #12 |
Senior Member
Join Date: Mar 2009
Posts: 2,384
|
I have seen a few sweet looking PVC combo arm rests/ rod holders that could also support the type of crossbar that Bob mentioned.
Does Lowrance make a thru hull transducer for the Elite 5? (not a shoot through, but a drill through). |
12-17-2010, 04:19 PM | #13 |
Senior Member
Join Date: Jun 2009
Posts: 186
|
josh, I have the mad frog gear liberator which I use on my prowler 13.
http://www.madfroggear.com/liberator/liberator.html actually works really well. not a permanent mount or anything though. |
12-17-2010, 04:29 PM | #14 |
Senior Member
Join Date: Feb 2007
Location: O.C.
Posts: 352
|
Revo Rod Holders
You don't need a crossbar or have to worry about bait tank access if you make a pair similar to one of these. On one I cut slots in the PVC so it would fit, on a better version I ground down the tube. They work great, are fully adjustable, don't get in the way, and give you two options on each holder.
__________________
"I Brake for Halibut" |
12-17-2010, 08:14 PM | #15 |
Senior Member
Join Date: Nov 2008
Location: Whittier
Posts: 126
|
What size pvc is that? How long is the longer tube?
|
12-19-2010, 08:16 AM | #16 |
Senior Member
Join Date: Mar 2008
Posts: 611
|
thank you everyone for the replies...
just gonna have ot get the now boat and contemplate... and as for the thru hull TX...still kinda freakin' out about cutting a hole in the bottom of a brand new boat...I suppose I'll get over it! yesterday, the surf was 3-4 feet with a 6-7 second interval... damn near impossible to make it in paddling the egg...(Outback) after getting tossed, ass over teakettle, while upside down under water... I made the discision to go ahead and get the Revo... I'll most likeley go get it when the shop opens up! it's time! Merry Christmas to me! keep the suggestions comming... |
12-19-2010, 09:33 AM | #17 |
Senior Member
Join Date: Feb 2007
Location: O.C.
Posts: 352
|
Rod Holders
Adam -
Hard to say. Slotting the bottom portion (w/relief holes) is much easier but not as clean looking since some of the slot will remain above the existing Hobie holder due to lack of compression where the slot ends. Grinding down the bottom section of the tube makes for a better looking holder but is labor intensive. Also doesn't leave a whole lot of wall thickness. Not sure which would be stronger - need some testing or I'd just be guessing. A personal choice. I made the slotted version first and knew I would work on some improvements, however minor. The next version will use ABS pipe which will eliminate painting and have the ability to float (ABS floats, PVC sinks). My $.02 - make a slotted version first and make a more permanent version when you figure out exactly what you want. The tubing is cheap... Almost forgot - I use these little spring loaded rope locks for the adjustable swing cord, about 59 cents or so for two at Walmart in the camping section. Still working after months and hasn't rusted yet. Something to do while we're all getting "cabin fever" from the rain. Time to rebuild a few reels...
__________________
"I Brake for Halibut" |
12-19-2010, 10:23 AM | #18 | |
Senior Member
Join Date: Mar 2005
Posts: 116
|
Quote:
|
|
12-19-2010, 02:21 PM | #19 |
Senior Member
Join Date: Jan 2008
Location: Costa Mesa
Posts: 278
|
I made this about 1 year ago, saw it at a baytubers tournament. I use 1/4 tubing to go into the kayak connected to a 1 1/4 to 1 1/2 coupler and the rest of the tubing is 1 1/2. No sanding or cutting required and the coupler fits perfectly into the notch at the top of the pole hoder in the revo. If you wanted a tighter fit, you could add cork or something.
|
Thread Tools | |
Display Modes | |
|
|