Moto-Revo Bassyaks - Kayak Fishing Adventures on Big Water’s Edge

Iceman · 03-31-2010, 05:06 PM

Customer came by for an installation, snapped some pix as I worked through it.

kill switch, lift and battery install to go........and test drive

fongman · 03-31-2010, 05:43 PM

nice work, Andy. Do the levers still function? I can see using the one to turn the shaft, but lifting the shaft doesn't seem feasible.

Iceman · 03-31-2010, 05:52 PM

The stock up/down will only serve to lock down the unit. Raising it will be done with a heavier rope and pad eye set up

03-31-2010, 05:06 PM	#1
Iceman Administrator Join Date: Mar 2005 Location: 1-2 miles off the point Posts: 6,948	Moto-Revo Bassyaks Customer came by for an installation, snapped some pix as I worked through it. kill switch, lift and battery install to go........and test drive __________________

03-31-2010, 05:52 PM	#3
Iceman Administrator Join Date: Mar 2005 Location: 1-2 miles off the point Posts: 6,948	The stock up/down will only serve to lock down the unit. Raising it will be done with a heavier rope and pad eye set up __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

03-31-2010, 05:43 PM	#2
fongman Senior Member Join Date: Mar 2005 Posts: 116	nice work, Andy. Do the levers still function? I can see using the one to turn the shaft, but lifting the shaft doesn't seem feasible.