SD Expedited Reel repair?... - Kayak Fishing Adventures on Big Water’s Edge

wade · 02-07-2010, 09:31 AM

i am in need BADLY of some fast reel repair for my new Daiwa Sealine 40SHA.
Five Sharks smoked it..
Everyone I talk to has a 1-two week turnaround which is customary for repairs, but its not ideal for i..
(pamela anderson...)

Need a set of carbontex washers installed ASAP! Any links faster than a week?
Im broke and only have 1 decent LJ reel..

BIGGGGGG Thanks!!

W

FISHIONADO · 02-07-2010, 10:22 AM

If you don't find someone you could buy the parts at Squidco and do it yourself to save $$. I used this site for one my Sealines. http://www.tackletour.com/articleree...edaiwa50h.html

wade · 02-07-2010, 11:09 AM

Thanks FISHIONADO! if i had the time i would in a second..been stuck in the studio remixing The Mighty Diamonds with no sleep for almost 20 hrs+..still more to go..no z's for me, & i need to fish!!!!!!............

Billy V · 02-07-2010, 07:24 PM

Joey has the drags at squidco for $14.
If you plan on installing them yourself be cautious when it comes to the gear lever spring.

It is a funky looking spring that can pop out easily, so keep some pressure on the lever to prevent it from coming loose.

The rest of the job is straight forward, use lots of grease around the handle bearing.
------------------------
1 week turn around is faster than average.

John M · 02-07-2010, 07:43 PM

Try Glen at 619-370-8670. He does work for Shimano. Is very good. Will work on other reels too.

John

-scallywag- · 02-08-2010, 09:29 AM

Like the others said, if the bearings are good it should only take 30min-hr to change out/grease the drag washers. IMO it's worth the time and effort to learn how to tear down, clean and service your favorite reels, that way your not shut down while your reels are getting repaired and its much cheaper (squidco stocks all the parts you need).

By far the best part about DIY reel service is repairing, or modifying beat up reels then landing a big fish on them! Its also interesting to see the difference in materials, design and component size between some of the most popular reels.

PescadorPete · 02-08-2010, 12:42 PM

You're in O'side? Why not Ken's? Talk to Wes or Mario and plead your case.

wade · 02-08-2010, 01:03 PM

Kens is my FIRST stop shop!!..

Ken is away, and the man Wes had a whole lotta weight to hold..
im checkin back in on tues..thanks for your suggestions guys!
i have to somehow pull some $ outta my arse and have a back up reel..

need to go to squidco to get those..whats the perferred lube?i may just break out my vintage joints again..
i have these awesome OLD-school vintage reels that my dearest Grandfather passed down to me..
Last year I took one out just for sh!ts and giggles and to pay homage to the Old Soldier..Break it out in his honor..So i get Wacked by a nice 40# class ghost, and the handle alone is only an inch long!
what a battle that 1 was!!! HAHAHAHAHAHAHAH....

02-07-2010, 09:31 AM	#1
wade Senior Member Join Date: Jun 2009 Location: Oceanside Posts: 1,214	SD Expedited Reel repair?... i am in need BADLY of some fast reel repair for my new Daiwa Sealine 40SHA. Five Sharks smoked it.. Everyone I talk to has a 1-two week turnaround which is customary for repairs, but its not ideal for i.. (pamela anderson...) Need a set of carbontex washers installed ASAP! Any links faster than a week? Im broke and only have 1 decent LJ reel.. BIGGGGGG Thanks!! W

02-08-2010, 01:03 PM	#8
wade Senior Member Join Date: Jun 2009 Location: Oceanside Posts: 1,214	Kens is my FIRST stop shop!!.. Ken is away, and the man Wes had a whole lotta weight to hold.. im checkin back in on tues..thanks for your suggestions guys! i have to somehow pull some $ outta my arse and have a back up reel.. need to go to squidco to get those..whats the perferred lube?i may just break out my vintage joints again.. i have these awesome OLD-school vintage reels that my dearest Grandfather passed down to me.. Last year I took one out just for sh!ts and giggles and to pay homage to the Old Soldier..Break it out in his honor..So i get Wacked by a nice 40# class ghost, and the handle alone is only an inch long! what a battle that 1 was!!! HAHAHAHAHAHAHAH.... Last edited by wade; 02-08-2010 at 01:17 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

02-07-2010, 10:22 AM	#2
FISHIONADO Senior Member Join Date: May 2006 Posts: 698	If you don't find someone you could buy the parts at Squidco and do it yourself to save $$. I used this site for one my Sealines. http://www.tackletour.com/articleree...edaiwa50h.html

02-07-2010, 11:09 AM	#3
wade Senior Member Join Date: Jun 2009 Location: Oceanside Posts: 1,214	Thanks FISHIONADO! if i had the time i would in a second..been stuck in the studio remixing The Mighty Diamonds with no sleep for almost 20 hrs+..still more to go..no z's for me, & i need to fish!!!!!!............

02-07-2010, 07:24 PM	#4
Billy V Senior Member Join Date: Sep 2006 Location: Bay Ho Posts: 1,382	Joey has the drags at squidco for $14. If you plan on installing them yourself be cautious when it comes to the gear lever spring. It is a funky looking spring that can pop out easily, so keep some pressure on the lever to prevent it from coming loose. The rest of the job is straight forward, use lots of grease around the handle bearing. ------------------------ 1 week turn around is faster than average.

02-07-2010, 07:43 PM	#5
John M Member Join Date: Mar 2005 Location: Escondido Posts: 89	Try Glen at 619-370-8670. He does work for Shimano. Is very good. Will work on other reels too. John

02-08-2010, 09:29 AM	#6
-scallywag- Banned Join Date: Mar 2009 Location: on the road... Posts: 598	Like the others said, if the bearings are good it should only take 30min-hr to change out/grease the drag washers. IMO it's worth the time and effort to learn how to tear down, clean and service your favorite reels, that way your not shut down while your reels are getting repaired and its much cheaper (squidco stocks all the parts you need). By far the best part about DIY reel service is repairing, or modifying beat up reels then landing a big fish on them! Its also interesting to see the difference in materials, design and component size between some of the most popular reels.

02-08-2010, 12:42 PM	#7
PescadorPete Senior Member Join Date: Mar 2005 Location: Leucadia, CA Posts: 261	You're in O'side? Why not Ken's? Talk to Wes or Mario and plead your case.