Thule Hullavator Width? - Kayak Fishing Adventures on Big Water’s Edge

pacoandy · 02-19-2021, 10:46 AM

Hi all. I have an Old Town Sportsman 106 with Minn Kota motor en route. I want to roof mount it and like the looks of the Hullavator side assist. The kayak is 37" wide max, but the Hullavator specs say 36" wide. Can anyone comment on whether this kayak will fit on the Hullavator? Thanks in advance

jruiz · 02-19-2021, 01:39 PM

Thule's customer service is really helpful and responsive, i would suggest giving them a call. I use a hullavator on an outback that's 34" wide and there's little to spare.

Mahigeer · 02-19-2021, 02:25 PM

Although I don’t have the measurement, my Outback fit, but I had to go past the normal installation.

AS a side note:
The spacing of the lifts should be so your fists are not too far apart.

It takes a bit of force to squeeze the handle to release the lifts.

The farther the lifts, harder to squeeze. The closer the lifts, the less stable the kayak will be.

Also figure a way to protect the body with tarp and maybe Styrofoam.

The first time I used it, I put two very small dent in my brand new 4Runner.

02-19-2021, 10:46 AM	#1
pacoandy Junior Join Date: Dec 2020 Posts: 5	Thule Hullavator Width? Hi all. I have an Old Town Sportsman 106 with Minn Kota motor en route. I want to roof mount it and like the looks of the Hullavator side assist. The kayak is 37" wide max, but the Hullavator specs say 36" wide. Can anyone comment on whether this kayak will fit on the Hullavator? Thanks in advance

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

02-19-2021, 01:39 PM	#2
jruiz Large Member Join Date: Jul 2012 Location: La Verne, CA Posts: 1,011	Thule's customer service is really helpful and responsive, i would suggest giving them a call. I use a hullavator on an outback that's 34" wide and there's little to spare.

02-19-2021, 02:25 PM	#3
Mahigeer Senior Member Join Date: Apr 2013 Location: Los Angeles Posts: 1,897	Although I don’t have the measurement, my Outback fit, but I had to go past the normal installation. AS a side note: The spacing of the lifts should be so your fists are not too far apart. It takes a bit of force to squeeze the handle to release the lifts. The farther the lifts, harder to squeeze. The closer the lifts, the less stable the kayak will be. Also figure a way to protect the body with tarp and maybe Styrofoam. The first time I used it, I put two very small dent in my brand new 4Runner.