|
04-05-2020, 07:04 PM | #1 |
Junior
Join Date: Sep 2019
Posts: 21
|
Battery ideas
Where and how do you mount your batteries. I have an 18ah battery I just got that's like twice the size and I need some ideas of where and how to mount it on a pro angler 14.
|
04-05-2020, 09:15 PM | #2 |
Senior Member
Join Date: Mar 2005
Location: san diego
Posts: 158
|
I have the 7 amp/hr. size battery and use a plastic storage container with a lid that snaps down on all sides making it moisture tight. Drilled a small hole in one side, put a grommet then ran the wires through, this keeps my battery dry.
|
04-06-2020, 07:27 AM | #3 |
Senior Member
Join Date: Jan 2012
Posts: 2,526
|
tried one of those
and then switched to an earth x lithium battery. super expensive, but they are half the weight, water proof in larger sizes, and come with a 2 year factory warranty because they last a long time. I think I am going on 4 or 5 years now? it has a built in battery protector, so when it discharges too low it will shutdown from further use and protect itself. I currently run a lowrance hds 7" and generally get a full day on water. I just pulled up some information and realized that the new lowrance 7' carbon has a draw rate of 1.5 amps compared to the hds gen 3 which has a 1.3 amp draw rate. I just learned something new. to protect the battery I use an ocean kayak battery bag mounted to the center sailing mast inside hull just behind front hatch. I use Hobie bait tank battery connectors for all my electrical connections. they are bulletproof. are you running any other kind of electrical devices off your battery? such as running lights, or bait tank? if so, it is recommended to power them up on a separate battery. this will isolate a failure to just one piece of equipment, as opposed to ruining your whole day. I have also used another brand of lipo battery and have very good success with them too. I use those for my vitals vault bait tank mounted on my ocean kayak. Bioenno battery is the manufacture. they make large battery's that can power up head units. they have a full line of battery sizes and I really like the 10 amp 6 vlt for running a bait tank. their price point is pretty reasonable in my opinion. I prefer the earth x battery for my fish finder because of the solid brass connectors on top which are corrosion resistant and water proof. hope this information helps.
|
04-06-2020, 01:06 PM | #4 | |
Banned
Join Date: Mar 2020
Posts: 86
|
Quote:
|
|
04-07-2020, 12:59 AM | #5 |
Senior Member
Join Date: Apr 2010
Posts: 6,856
|
I am using and have been using a Bioenno 12V 12Ah LFP Battery (ABS, BLF-1212AS) for a few years now. The price is far more than a typical SLA battery but the battery run time and the overall weight of the battery outweighs the additional cost of the battery.
As far as where to mount the battery.......mine is mounted inside the kayak right under the seat and just aft of the center hatch, it is easily accessible while sitting. The battery bag that I used is the Ocean Kayak Battery Bag, its about $35. The Bienno battery fits perfect in the bag, it almost as if the bag was made for it
__________________
www.facebook.com/Teamsewer |
04-07-2020, 08:42 AM | #6 | |
Senior Member
Join Date: Jan 2012
Posts: 2,526
|
X2
Quote:
|
|
04-07-2020, 06:35 AM | #7 |
Brandon
Join Date: Jul 2011
Location: San Diego
Posts: 2,345
|
The nocqua 10AH battery has been great for me. Talk about small and light.
Sent from my iPhone using Tapatalk |
Thread Tools | |
Display Modes | |
|
|