Outback 2016: Rudder won't go down and steers to left - HELP - Kayak Fishing Adventures on Big Water’s Edge

filippo · 07-29-2017, 12:24 PM

Hi

When I landed at shore I forgot to pull the rudder up and the cord was still tied to the cleat (big mistake, I know), dragging the rudder blade on sand and breaking the pin. I've replaced the pin successfully and the rudder doesn't work as well now.

Now when I try to put the rudder down, the blade hits the stern of the kayak and won't go down. I have to manually lift it up and place it down, which means I have to do this before I hit the water -- if I forget I'm screwed. Also, steering to the right is a bit harder now but stays in place, and the rudder control knob tends to shift left way too easily, may times on its own too. My guess is that the cables got tied too much when the rudder dragged into the sand, but I still can't explain why the blade shifts and hits the kayak when I try to pull it down.

Any help is appreciated it.

Thanks

ernhernandez68 · 07-29-2017, 12:34 PM

The strings have to go thru the slot in pin for leverage

Sent from my iPhone using Tapatalk

filippo · 07-29-2017, 12:37 PM

Yes, they are but only when I steer right. When the rudder is straight or to the left they're free from the pin.

ernhernandez68 · 07-29-2017, 12:44 PM

Sent from my iPhone using Tapatalk

filippo · 07-29-2017, 12:47 PM

I see now. I have it reversed. I tried looking it up on Google Images but most have it the way I have it now, at least I thought so.

I'll give that a try. Thank you!

ernhernandez68 · 07-29-2017, 12:50 PM

Rotate the pin 90 degrees ccw so the slot is facing to the right in your last picture

Sent from my iPhone using Tapatalk

filippo · 07-29-2017, 12:52 PM

Will do. Thanks for your help! I appreciate it.

ernhernandez68 · 07-29-2017, 01:15 PM

Glad I could help

Sent from my iPhone using Tapatalk

Mahigeer · 07-29-2017, 02:02 PM

Thanks for the post and the solution provided.

Good to know for future.

filippo · 08-06-2017, 10:40 AM

@ernhernandez68: just tried your suggestion and it worked! That was easy. Thank you!

rnproductions300 · 12-16-2017, 08:19 PM

I repositioned the pin, but it still isn’t working.

When I pull my rudder line up it goes this far to the right.
In my other picture of my rudder handle that is where my rudder is in center position.

Sent from my iPhone using Tapatalk

rnproductions300 · 12-16-2017, 08:20 PM

Quote:

Originally Posted by rnproductions300

I repositioned the pin, but it still isn’t working.

When I pull my rudder line up it goes this far to the right.
In my other picture of my rudder handle that is where my rudder is in center position.

Sent from my iPhone using Tapatalk

Sent from my iPhone using Tapatalk

07-29-2017, 12:24 PM	#1
filippo Senior Member Join Date: Apr 2016 Posts: 128	Outback 2016: Rudder won't go down and steers to left - HELP Hi When I landed at shore I forgot to pull the rudder up and the cord was still tied to the cleat (big mistake, I know), dragging the rudder blade on sand and breaking the pin. I've replaced the pin successfully and the rudder doesn't work as well now. Now when I try to put the rudder down, the blade hits the stern of the kayak and won't go down. I have to manually lift it up and place it down, which means I have to do this before I hit the water -- if I forget I'm screwed. Also, steering to the right is a bit harder now but stays in place, and the rudder control knob tends to shift left way too easily, may times on its own too. My guess is that the cables got tied too much when the rudder dragged into the sand, but I still can't explain why the blade shifts and hits the kayak when I try to pull it down. Any help is appreciated it. Thanks

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

07-29-2017, 12:34 PM	#2
ernhernandez68 Junior Join Date: May 2017 Location: Riverside ca Posts: 8	The strings have to go thru the slot in pin for leverage Sent from my iPhone using Tapatalk

07-29-2017, 12:37 PM	#3
filippo Senior Member Join Date: Apr 2016 Posts: 128	Yes, they are but only when I steer right. When the rudder is straight or to the left they're free from the pin.

07-29-2017, 12:44 PM	#4
ernhernandez68 Junior Join Date: May 2017 Location: Riverside ca Posts: 8	Sent from my iPhone using Tapatalk

07-29-2017, 12:47 PM	#5
filippo Senior Member Join Date: Apr 2016 Posts: 128	I see now. I have it reversed. I tried looking it up on Google Images but most have it the way I have it now, at least I thought so. I'll give that a try. Thank you!

07-29-2017, 12:50 PM	#6
ernhernandez68 Junior Join Date: May 2017 Location: Riverside ca Posts: 8	Rotate the pin 90 degrees ccw so the slot is facing to the right in your last picture Sent from my iPhone using Tapatalk

07-29-2017, 12:52 PM	#7
filippo Senior Member Join Date: Apr 2016 Posts: 128	Will do. Thanks for your help! I appreciate it.

07-29-2017, 01:15 PM	#8
ernhernandez68 Junior Join Date: May 2017 Location: Riverside ca Posts: 8	Glad I could help Sent from my iPhone using Tapatalk

07-29-2017, 02:02 PM	#9
Mahigeer Senior Member Join Date: Apr 2013 Location: Los Angeles Posts: 1,897	Thanks for the post and the solution provided. Good to know for future.

08-06-2017, 10:40 AM	#10
filippo Senior Member Join Date: Apr 2016 Posts: 128	@ernhernandez68: just tried your suggestion and it worked! That was easy. Thank you!

12-16-2017, 08:19 PM	#11
rnproductions300 Member Join Date: Oct 2017 Posts: 34	I repositioned the pin, but it still isn’t working. When I pull my rudder line up it goes this far to the right. In my other picture of my rudder handle that is where my rudder is in center position. Sent from my iPhone using Tapatalk