Kayak Fishing Adventures on Big Water’s Edge  

Go Back   Kayak Fishing Adventures on Big Water’s Edge > Kayak Fishing Forum - Message Board > General Kayak Fishing Discussion

Reply
 
Thread Tools Display Modes
Old 02-26-2017, 08:14 AM   #1
joeasaro
Member
 
Join Date: May 2009
Location: Ramona, Ca.
Posts: 41
Boone Dox Landing Gear

Has anyone recently installed a Boone Dox landing gear on their PA 14? If so what are your impressions and how was the install?

Thanks,

Joe
joeasaro is offline   Reply With Quote
Old 03-02-2017, 07:13 AM   #2
Baja_Traveler
Senior Member
 
Baja_Traveler's Avatar
 
Join Date: Nov 2005
Location: Table 17, Bay Park Fish Co.
Posts: 943
Over 200 views and nobody has anything to say.
I think because I've never seen one here in So. Cal. - so very few if anybody is using it here. But tons of them are in use on the East Coast, so must be a regional thing.
Personally I like the idea - so much better than a scupper cart, which is near impossible to use on a huge PA loaded with gear. The one thing I always hate when returning to the beach is having to roll the PA on its side to get that stupid cart installed with rods, tackle boxes and assorted gear falling out.
I've been working on plans to build my own version using carbon hex tubing for my new Solo Skiff when it gets here - and make an extra cross bracket for the PA so I just swap wheels between them.
Baja_Traveler is offline   Reply With Quote
Old 03-02-2017, 08:52 AM   #3
kirkdavis
Senior Member
 
kirkdavis's Avatar
 
Join Date: Apr 2015
Location: SD County
Posts: 360
I had never seen one, but I agree that putting the scupper wheels on a Hobie is a pain. I have thought about making something myself.
One thing that sticks in my mind is that the wheels will be just one more thing for my line to get tangled in. I already have issues getting tangle in my paddle and my rudder. I guess the location right behind the drivers seat might not be too bad of a tangle magnet.
Another benefit would be more storage room behind the seat. You got me thinking now. Keep us updated if you design your own, and I will do likewise.
kirkdavis is offline   Reply With Quote
Old 03-03-2017, 01:51 PM   #4
makobob
Baitless on Baja
 
makobob's Avatar
 
Join Date: May 2013
Location: Vista California, Gonzaga, San Quintin, Asuncion, Mag Bay
Posts: 4,250
Boone Dox Landing gear will soon be available in So Cal. Factory is backordered and expected to ship next week. OEX has some on order for the New SOLO SKIFF owners. Available in a hard tire and Wheel Eze sand tire editions. The Boone Dox have been installed on the Solo Skiff and Hobie Pa's and work well on these boats. Tight Lines.
__________________
http://www.mako-ville.com

Home 760-630-4470
Cell 760-520-2514

YES YOU CAN
makobob is offline   Reply With Quote
Old 03-04-2017, 08:42 AM   #5
tacmik
Senior Member
 
tacmik's Avatar
 
Join Date: Jun 2007
Location: East County
Posts: 914
Like the idea behind the boone dox was wondering about it coming with wheel eze tires. glad to see they do.
__________________
tacmik is offline   Reply With Quote
Old 04-28-2017, 03:19 PM   #6
Davidinwakulla
Junior
 
Join Date: Apr 2017
Posts: 3
After having to unload all my gear and turn my Jackson Cuda on its side to put a supper cart underneath, I ordered a boondocks for my new PA 14. It works fantastic. I put wheels down on my way to the landing, land the nose and roll it on my trailer. Very sturdy materials, extremely difficult install on the PA 14.
Davidinwakulla is offline   Reply With Quote
Old 04-28-2017, 05:29 PM   #7
kirkdavis
Senior Member
 
kirkdavis's Avatar
 
Join Date: Apr 2015
Location: SD County
Posts: 360
My Thoughts EXACTLY

Quote:
Originally Posted by kirkdavis View Post
I had never seen one, but I agree that putting the scupper wheels on a Hobie is a pain. I have thought about making something myself.
One thing that sticks in my mind is that the wheels will be just one more thing for my line to get tangled in. I already have issues getting tangle in my paddle and my rudder. I guess the location right behind the drivers seat might not be too bad of a tangle magnet.
Another benefit would be more storage room behind the seat. You got me thinking now. Keep us updated if you design your own, and I will do likewise.
I just got the sailing rudder with new turbo fins, and so far first time out did not tangle a line in the rudder, but....yeah, it's a pain. I finally cut my line with with a plastic jig because I am NOT planning to crawl to the aft of my Outback to untangle a line. later I ended up snagging the line with another rig and got my lure back. Anyway, I digress.
Maybe it won't tangle too bad being closer behind the seat, and it might be worth an occasional tangle for the ease of getting wheels under the yak. I too am thinking of making something similar. Maybe instead of rotating back 90 degrees you could rotate them 180 and have them up in the air directly behind the seat. Might be too high?
kirkdavis is offline   Reply With Quote
Old 04-28-2017, 06:38 PM   #8
makobob
Baitless on Baja
 
makobob's Avatar
 
Join Date: May 2013
Location: Vista California, Gonzaga, San Quintin, Asuncion, Mag Bay
Posts: 4,250
Don't overthing a great product, they are very well designed and more that you need for an outback, us with the Solo's might be pushing their limits, time will tell.
__________________
http://www.mako-ville.com

Home 760-630-4470
Cell 760-520-2514

YES YOU CAN
makobob is offline   Reply With Quote
Old 04-28-2017, 07:20 PM   #9
Baja_Traveler
Senior Member
 
Baja_Traveler's Avatar
 
Join Date: Nov 2005
Location: Table 17, Bay Park Fish Co.
Posts: 943
There is a product made by YakAttack called a Rigging Bullet that makes installing backing plates in impossible to reach places a cinch. They are cheap enough, but if you know someone with a lathe they would be easy enough to make.
Baja_Traveler is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -8. The time now is 05:14 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
© 2002 Big Water's Edge. All rights reserved.