Hoopnet Mending - Kayak Fishing Adventures on Big Water’s Edge

ful-rac · 10-27-2016, 11:06 AM

2 weeks ago I accidentally caught a hoopnet while fishing for halibut. The net was pretty fouled with growth, it looked like it had been down there for awhile, I decided to save it. Iv'e been wanting to learn how to fix my own hoops for years now, ever since I started hooping and got my first hole in the net probably from a shark or eel...

So I cleaned the sucker up and washed and scraped off most of the gunk that had grown on it. I found that, from just sitting in the sand some of the netting had just worn down and was getting ready to go. Just from pulling on the netting with my fingers it was enough to rip in several different spots.

Curious as to if I could learn how to mend a net easily...I acquired a net needle or also known as a shuttle, did a little bit of online research and found the repairing process is pretty simple, there really is nothing to it. So with a needle and some twine you could easily repair all your hoops practically forever. So while I was trying to figure out the correct size of the seine twine I needed to effect a good repair. I decided to practice on the recovered hoopnet, which had a pretty significant hole at this point. Got some home depot mason twine and used that for practice while I waited on the seine twine from amazon.

So after having given it a practice run, I was ready to do it with the seine twine. So after waiting on the mailman for a few days...I finally get to put it to use. I think it came out pretty good?

Back in Service!

So the following week I asked around if anybody had a ripped net I could repair...and there sure was...Andy had a net with a hole in it big enough to stick your whole arm through. So I offered to fix the holes for him for fun...and he was happy to let me fix them for him...I noticed that he already had a other holes that were zip tied closed, and some other spots where he tried to close holes with spectra. I fixed'm all up...

Back in Service!

slobound · 10-27-2016, 11:17 AM

Nice work!

Sent from my iPhone using Tapatalk

Zed · 10-27-2016, 11:56 AM

Skills to pay the bills.

battleborn · 10-27-2016, 12:27 PM

Awesome work. How long did it take to do a hoop?

Sent from my SAMSUNG-SM-N920A using Tapatalk

ful-rac · 10-27-2016, 12:29 PM

Quote:

Originally Posted by battleborn

Awesome work. How long did it take to do a hoop?

Sent from my SAMSUNG-SM-N920A using Tapatalk

Believe it or not just a few minutes...

cabojohn · 10-27-2016, 01:41 PM

Niiice Tony.
Net looks great.
Well done.

krusty · 10-27-2016, 06:37 PM

Very nice! What size seine twine did you use for the repair? And is the seine twine tarred?

ful-rac · 10-28-2016, 09:44 AM

Quote:

Originally Posted by krusty

Very nice! What size seine twine did you use for the repair? And is the seine twine tarred?

You can use anywhere from #18 which is thin - to #22 which is a bit heavier. Yes the seine twine is tarred.

Wyota · 10-29-2016, 12:43 PM

Nice work, I now plan to try and repair a couple of my flat nets.

You mentioned doing some research to find it a simple process. Do you have a link to recommend as best to see/learn the process as you did?

Thanks

Vikingj · 11-01-2016, 09:24 AM

Wow, I'm impressed! I could never find net replacements so attempted to mend what I could w dental floss and zip ties (not recommended!). Thanks for report. I'd also be interested in links you used.

ful-rac · 11-01-2016, 09:54 AM

You have to watch it again and again and pay attention to what he's doing. He's kind of hard to understand due to the accent and all but study it and you should be able to figure it out. It's really not that complicated at all, you just need a simple cheap tool. You can get a net needle for like...$ 5 bucks or a pack of them for 10 or 15 bucks on amazon. You could even make your own...

Wyota · 11-05-2016, 10:20 AM

Thanks for the video. You're right, you have to watch it several times because of the speed.

Spent 3 years stationed just down the road from where they are at, so I can actually understand the broad Yorkshire accent he has.

10-27-2016, 11:56 AM	#3
Zed BANNED Join Date: Mar 2005 Location: W of 5 Posts: 1,265	Skills to pay the bills. __________________ Give a man a fish and he'll eat for a day. Give a fish a man and he'll eat for a week.

10-29-2016, 12:43 PM	#9
Wyota Member Join Date: Dec 2015 Posts: 37	Nice Work--Best link to repair process? Nice work, I now plan to try and repair a couple of my flat nets. You mentioned doing some research to find it a simple process. Do you have a link to recommend as best to see/learn the process as you did? Thanks

11-01-2016, 09:54 AM	#11
ful-rac Emperor Join Date: May 2009 Location: Buena Park Posts: 3,649	Here's the main video that I used You have to watch it again and again and pay attention to what he's doing. He's kind of hard to understand due to the accent and all but study it and you should be able to figure it out. It's really not that complicated at all, you just need a simple cheap tool. You can get a net needle for like...$ 5 bucks or a pack of them for 10 or 15 bucks on amazon. You could even make your own... __________________ There's nothing colder than yesterday's hotdog.

11-05-2016, 10:20 AM	#12
Wyota Member Join Date: Dec 2015 Posts: 37	North Yorkshire Accent Thanks for the video. You're right, you have to watch it several times because of the speed. Spent 3 years stationed just down the road from where they are at, so I can actually understand the broad Yorkshire accent he has.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

10-27-2016, 11:06 AM	#1
ful-rac Emperor Join Date: May 2009 Location: Buena Park Posts: 3,649	Hoopnet Mending 2 weeks ago I accidentally caught a hoopnet while fishing for halibut. The net was pretty fouled with growth, it looked like it had been down there for awhile, I decided to save it. Iv'e been wanting to learn how to fix my own hoops for years now, ever since I started hooping and got my first hole in the net probably from a shark or eel... So I cleaned the sucker up and washed and scraped off most of the gunk that had grown on it. I found that, from just sitting in the sand some of the netting had just worn down and was getting ready to go. Just from pulling on the netting with my fingers it was enough to rip in several different spots. Curious as to if I could learn how to mend a net easily...I acquired a net needle or also known as a shuttle, did a little bit of online research and found the repairing process is pretty simple, there really is nothing to it. So with a needle and some twine you could easily repair all your hoops practically forever. So while I was trying to figure out the correct size of the seine twine I needed to effect a good repair. I decided to practice on the recovered hoopnet, which had a pretty significant hole at this point. Got some home depot mason twine and used that for practice while I waited on the seine twine from amazon. So after having given it a practice run, I was ready to do it with the seine twine. So after waiting on the mailman for a few days...I finally get to put it to use. I think it came out pretty good? Back in Service! So the following week I asked around if anybody had a ripped net I could repair...and there sure was...Andy had a net with a hole in it big enough to stick your whole arm through. So I offered to fix the holes for him for fun...and he was happy to let me fix them for him...I noticed that he already had a other holes that were zip tied closed, and some other spots where he tried to close holes with spectra. I fixed'm all up... Back in Service! __________________ There's nothing colder than yesterday's hotdog.

10-27-2016, 11:17 AM	#2
slobound Member Join Date: Dec 2014 Posts: 61	Nice work! Sent from my iPhone using Tapatalk

10-27-2016, 12:27 PM	#4
battleborn Senior Member Join Date: Oct 2011 Posts: 221	Awesome work. How long did it take to do a hoop? Sent from my SAMSUNG-SM-N920A using Tapatalk

10-27-2016, 01:41 PM	#6
cabojohn PROBATION Join Date: Jul 2005 Posts: 656	Niiice Tony. Net looks great. Well done.

10-27-2016, 06:37 PM	#7
krusty Junior Join Date: Jul 2014 Posts: 3	Very nice! What size seine twine did you use for the repair? And is the seine twine tarred?

11-01-2016, 09:24 AM	#10
Vikingj Senior Member Join Date: Jul 2008 Location: Dana Point area Posts: 438	Wow, I'm impressed! I could never find net replacements so attempted to mend what I could w dental floss and zip ties (not recommended!). Thanks for report. I'd also be interested in links you used.