|
08-07-2015, 11:51 AM | #1 |
Member
Join Date: Aug 2015
Posts: 40
|
Raymarine Dragonfly
Has anyone mounted one of these on a Hobie Pro Angler? If so, what do you think of it? Any issues or concerns with it? I've been thinking about mounting one on my newly purchased PA12. I used to have a 18' Sea Pro CC with a Raymarine A65, so I can attest for the accuracy and reliability of the manufacturers product. The Dragonfly 4 Pro with Navionics Gold is the same price as the Lowrance Elite 4 Chirp that lots of guys mount on their kayaks. Thanks in advance for the feedback.
|
08-07-2015, 01:23 PM | #2 |
LOWSPARK
Join Date: Dec 2013
Location: CARLSBAD
Posts: 251
|
Dragonfly
I've been using one for 6 months on a PA14 and I love it. Great picture and my test each time on the water is if I can drop a 4" jig head to the bottom and see it bounce I'm happy. It's helped me to catch more fish for sure. I use the original 5" model with GPS. The 5" or the 7" would be my choice. The transducer fits in the transducer spot perfect.
|
08-07-2015, 01:56 PM | #3 |
Senior Member
Join Date: May 2014
Location: Fort Lauderdale
Posts: 1,945
|
I have the Dragonfly 7 mounted on my hobie pro angler 14. I used this ram mount
http://www.rammount.com/part/RAP-BB-201-14U to keep the finder high off the water and close to the chair so that I can easily observe and adjust view. I love the picture on the DF7, but am on my 3rd unit in less than one year for reliability issues. You can see my set-up on this post: http://www.bigwatersedge.com/bwevb/s...ad.php?t=26441 |
08-07-2015, 03:32 PM | #4 |
Member
Join Date: Aug 2015
Posts: 40
|
Reliability Issues?
Can you elaborate on this? What are the issues that you have encountered? Did they involve damage when the Kayak rolled, or did it just crap out? The gentleman I bought the kayak from said he rolled his kayak and his Lowrance malfunctioned after that. he said the head unit was fine, but he had water intrusion in the SD Card slot where the Navionics Chip is inserted (which I'm pretty sure is supposed to be water proof). If I buy the Dragonfly, I will get it from West Marine with the 2 year extended warranty plan. It's about $70 more, but WELL worth it. I will definitely look into the taller ram mount. I like your set up, and I really like that bloody YFT you're bouncing onto your lap!
|
08-07-2015, 05:12 PM | #5 |
LOWSPARK
Join Date: Dec 2013
Location: CARLSBAD
Posts: 251
|
Back to me
I have the first generation and they changed the micro card door(it's a magnetic operation) after with some complaints about the door failing sometimes underwater. But I rolled mine (PA)three times in a row(I know)trying to learn how to surf launch in 3' surf, the launch attempt was a complete failure but the dragonfly is still working great
|
08-07-2015, 07:57 PM | #6 |
Senior Member
Join Date: Mar 2007
Posts: 265
|
I returned my dragonfly 5 and back to my old HDS 5 for the following reason:
1. GPS zoom in/ zoom out "steps" is to big, can't fine tune the zoom to my liking . HDS 5 has better zoom capability. 2. Sonar in auto mode sometime lose it's bottom lock. Switch to manual and it work again.. not reliable as HDS 5. Other than that dragonfly 5 is very good in all other aspect . 1.Not as bulky and heavy as HDS . 2. HDS has magnetic card reader door( no good), Dragonfly has tight rubber seal door ( better) 3. one cable instead of two. |
08-08-2015, 12:42 AM | #7 | |
Senior Member
Join Date: May 2014
Location: Fort Lauderdale
Posts: 1,945
|
Quote:
|
|
08-08-2015, 12:03 AM | #8 | |
Senior Member
Join Date: May 2014
Location: Fort Lauderdale
Posts: 1,945
|
Quote:
I have rolled twice with the DF7. Thankfully the unit kept working after the rolls, which during one incident was huge peace of mind as the unit indicated I was drifting back to the beach(with the 2 fwd hatches submerged, was unable to pump the kayak out). About 2 weeks after the second roll, the card reader stopped working, and I believe the roll incident excellerated corrosion that caused the failure. The on/Off button failure occurred right before a tournament, being that I did not have time to deal with re-rigging, or wait the 6 weeks for raymarine to make a repair, I bought a new unit from west marine with the 2 year warranty for an additional 84.50. Regardless of which brand unit one buys, if it is going on a kayak, a warranty is a good investment. The unit I bought at west marine has never been rolled, and is starting to have the same button sticking on problem that I had with the original unit. |
|
08-07-2015, 11:32 PM | #9 | |
Senior Member
Join Date: May 2014
Location: Fort Lauderdale
Posts: 1,945
|
Quote:
|
|
08-10-2015, 10:09 AM | #10 | |
Member
Join Date: Aug 2015
Posts: 40
|
Quote:
|
|
08-10-2015, 05:42 PM | #11 |
Senior Member
Join Date: May 2014
Location: Fort Lauderdale
Posts: 1,945
|
Thanks, It is a solution provided the transducer fits in the hobie lowrance ready area. Wish hobie would make that area larger to accomodate the larger transducers that combine side and down scan into one unit. Maybe hobie could redesign the area to accomodate the full range of sidescan. Having a unit on an arm over the side is a speed killer.
|
08-11-2015, 09:45 AM | #12 |
Member
Join Date: Aug 2015
Posts: 40
|
I'm thinking that your signal is going to be slightly degraded regardless of what unit you use because you're transmitting through the plastic transducer protection cover. Those transducers are designed to be mounted to the transom of a boat, and angled just right to reflect what's directly below the boat when you're not on plane. Typically, they are unobstructed. When I was in the Navy, I was a Sonar Tech. That's essentially what your transducer is. It's a simplified version of Sonar (Sound Navigation and Ranging) technology. Sound travels 3.5x's faster under water, and there are 3 naturally ocurring mediums that effect sound travel. These are temperature, pressure, and salinity. The designers of these units use mathematical algorithms to determine averages for particular conditions. Usually the water temperature at the surface is factored in to give you a reasonably accurate reading. What they don't account for is transmitting through a piece of plastic or resin. They do make thru-hull transducers, but these transducers aren't thru hull. JohnMckroidJr's fix for this is the best scenario (IMHO).
|
Thread Tools | |
Display Modes | |
|
|