Size recommendations for Daiwa Sealine and Ugly Stik Tiger

[CardShark]

After doing some research online on bang for the buck setups for my kayak, I think I have settled on a Daiwa Sealine X-SHA and a Ugly Stik Tiger (either regular or Lite).

I'm ordering online so can you guys please recommend which exact model and sizes to buy?

This setup will primarily be to drift live bait for Yellowtail, White Seabass, and Halibut. It would be great if it could do double duty and be used to throw surface iron and yo-yo as well.

If anyone has any other recommendations in the price range (about $100 for Sealine and $60 for Ugly Stik Tiger), I'm open to suggestions as well.

[dmrides]

Sealines are good reels. I like the 20 size for flyline bait, but you would be much better off with a 40 size for iron and dropper loop. The drags on the sealines need to be swapped out for carbon drags as they will start sticking very quickly. Before you buy a sealine, look at the seagates. The seagates are better reels, they are not as tall as the sealines, they come with carbon drags, the gearbox is rotated forward, they don't click when you wind and they are not much more money. Plus they have a 35 size, which is much better if filling with braid. For what you are looking for, the seagate 35 would be my recommendation.

I can not offer you any advice on the ugly stick as I have never had or used one. I hear they are a great value. I would get a rod that has a sweet spot at 30#.

[taggermike]

The combo you're looking at will get the job done well at a bargain. I'd look at the Sealine 30 or 40. 20 too small n 50 bigger than you need. Tigers are solid fish killing rods, tough and hold up well for yak fishing. I'm not sure of the specs but 7' rated for 30 or 40 would be the go to. As for iron, this out fit would yoyo ok but not be too good for surface iron. A "do all" rod doesn't really exist. Mike

[PapaDave]

I'd check out the Sealine 20LW series. I find this reel to be very strong and I hook it up on an Sabre. the reel was about $170 and the pole I got on sale at Big 5 for $40.

[FISH11]

I have a Ugly stick Tiger 7' MH and in medium or mediun heavy is best and I have it matched to the Daiwa sealine X SHA in a 50. 30 or 40 will work. I also have a 20 on a tiger 7' light but that is too light unless it's for rock fish or medium size fish. Yellows are too much for it , but the MH is killer for it's pulling power. It lets me reel in much faster than my Daiwa rod and sealine set-up. The Ugly stick Tiger is a super rod, for the buget price nothing comes close. You can get much better rods but not without spending more than 3 times the money (or more). They have much better guides than my Shimano or Daiwa rods. I installed carbon drag washers on all the Daiwas and that is super.

[5-20]

I have the 7' MH. No fish on that rod yet but yea, it seems to be the best tiger model for the lj area for those fish you want. Definitely a cool value at that price point. Guys in the gulf love that rod for its durability and catch a bunch of very nice sharks on them.

The only thing, the 2-3 times I used the tiger, the braid (65 lb pp) seemed to catch around the tip top more than it would with the other phenix psw rods I usually use. Not sure if that's something you guys have noticed with yours? Could always do a fast fix and swap it out for a fuji to see if that'd help, I suppose.

[CardShark]

Originally Posted by taggermike

The combo you're looking at will get the job done well at a bargain. I'd look at the Sealine 30 or 40. 20 too small n 50 bigger than you need. Tigers are solid fish killing rods, tough and hold up well for yak fishing. I'm not sure of the specs but 7' rated for 30 or 40 would be the go to. As for iron, this out fit would yoyo ok but not be too good for surface iron. A "do all" rod doesn't really exist. Mike

Thanks Mike. I figured one rod wouldn't do a great job at all three.

Do you mind giving me a quick "what to look for" in the optimum rod for all 3 techniques? I'm sure the info would help others as well.

[Iceman]

I just picked up a 30 for flylining and 40 for dropper loop and yoyo fishing. Great reels for $100.

[taggermike]

There are too many options to give exact rod n reel recommendations but i can give some generalities that work for me. For yoyo a 6-7' heavy action, glass or graphite, rod and a strong reel with good drags n 4:1 gears is perfect. Yoyo is not a subtle style. Drop in grind with little or no casting.

Surface iron does involve long casts. Some guys like shorter rods but I learned on sports boats and I'm comfortable with 9'. 8-9' 40lb rated with any good casting reel. From a sealine 40 to a new Trinidad.

For a live bait out fit for yrllowtail the out fit youre looking to get will work fine. Any rod rated to fish 30 or 40 will work fine. And a reel with solid drags and a couple hundred yards of capacity is all you need. Newer and more pricey gear is nice and can be fished harder with smoother drags, greater cranking power, and easier cast ability, but for 50 years huge numbers of every fish in so cal have been caught on all glass saber rods and Penn jig masters, 500s, squiders, and 4/0s. Mike

[CardShark]

Originally Posted by dmrides

Sealines are good reels. I like the 20 size for flyline bait, but you would be much better off with a 40 size for iron and dropper loop. The drags on the sealines need to be swapped out for carbon drags as they will start sticking very quickly. Before you buy a sealine, look at the seagates. The seagates are better reels, they are not as tall as the sealines, they come with carbon drags, the gearbox is rotated forward, they don't click when you wind and they are not much more money. Plus they have a 35 size, which is much better if filling with braid. For what you are looking for, the seagate 35 would be my recommendation.

I can not offer you any advice on the ugly stick as I have never had or used one. I hear they are a great value. I would get a rod that has a sweet spot at 30#.

Thanks for the advice dmrides. A couple of questions....

Is the carbon drag in the Seagate as good as what you would typically upgrade the Sealine to? How much does upgrading Sealine drags cost?

What's the advantage of a gearbox rotated forward?

So Sealine's click when you reel even with the bait clicker off?

[dmrides]

Originally Posted by CardShark

Thanks for the advice dmrides. A couple of questions....

Is the carbon drag in the Seagate as good as what you would typically upgrade the Sealine to? How much does upgrading Sealine drags cost?

What's the advantage of a gearbox rotated forward?

So Sealine's click when you reel even with the bait clicker off?

The drags on the seagates are not quite a good as the Carbontex upgrade, but really close. The Carbontex washers are $20.

Rotating the gear box gets it out of the way. I cant seem to hold the rod the way I want to with a sealine. Makes the biggest difference when tossing the surface iron.

The seagates have the same silent dogs that the saltist does. The sealines do not and make a slight clicking sound. It doesn't make much difference and honestly you really only notice it in the shop. You won't hear it over your hooting and hollering when you're hooked up!

[yemff]

I've got a 30 for bait, with a 7' medium tiger, would get the tiger lite if I did it again. 40 or 50 with a medium heavy for iron

[CardShark]

Originally Posted by FISH11

I have a Ugly stick Tiger 7' MH and in medium or mediun heavy is best and I have it matched to the Daiwa sealine X SHA in a 50. 30 or 40 will work. I also have a 20 on a tiger 7' light but that is too light unless it's for rock fish or medium size fish. Yellows are too much for it , but the MH is killer for it's pulling power.

I only see one 7' Tiger Light (BWCL220070) and its rated Heavy and for 14-40lb test. This was actually the rod I was leaning towards. Is that the rod you're saying is too light for YT?

http://www.uglystik.com/Ugly-Stik-Ti...start=17&sz=16


On the 7' normal Tigers, there seems to be 2 different model numbers each for the M and MH. I can't see any difference in the specifications. Does anyone know what the different model #'s mean?

http://www.uglystik.com/Ugly-Stik-Ti...efault,pd.html

Originally Posted by yemff

I've got a 30 for bait, with a 7' medium tiger, would get the tiger lite if I did it again. 40 or 50 with a medium heavy for iron

Why would you prefer the Tiger Lite if you did again for the bait setup?

[T-Rex]

Originally Posted by dmrides

Sealines are good reels. I like the 20 size for flyline bait, but you would be much better off with a 40 size for iron and dropper loop. The drags on the sealines need to be swapped out for carbon drags as they will start sticking very quickly. Before you buy a sealine, look at the seagates. The seagates are better reels, they are not as tall as the sealines, they come with carbon drags, the gearbox is rotated forward, they don't click when you wind and they are not much more money. Plus they have a 35 size, which is much better if filling with braid. For what you are looking for, the seagate 35 would be my recommendation.

I can not offer you any advice on the ugly stick as I have never had or used one. I hear they are a great value. I would get a rod that has a sweet spot at 30#.

Ditto on the Seagate 35. A little lighter and stronger drag than the Sealines. They occassionally go on sale for under $100. If you go with the Sealine the 30 is a good size for YT and WSB.

[CardShark]

Originally Posted by T-Rex

Ditto on the Seagate 35. A little lighter and stronger drag than the Sealines. They occassionally go on sale for under $100. If you go with the Sealine the 30 is a good size for YT and WSB.

When and where have the Seagates been on sale for under $100? That seems like a great deal.

I've been kicking myself since I didn't pick up a Sealine X-SHA for $89 when Turner's had them for sale at the Fred Hall Show. I haven't seen them on sale since.

[T-Rex]

Originally Posted by CardShark

When and where have the Seagates been on sale for under $100? That seems like a great deal.

I've been kicking myself since I didn't pick up a Sealine X-SHA for $89 when Turner's had them for sale at the Fred Hall Show. I haven't seen them on sale since.

Bought two online last year. Seagate 50H for $97 from an Amazon Lightning deal and a new Seagate 35 for $99 on eBay.

[CardShark]

Originally Posted by T-Rex

Bought two online last year. Seagate 50H for $97 from an Amazon Lightning deal and a new Seagate 35 for $99 on eBay.

Can you or someone else comment how the generations work on the Seagate if I'm cruising Ebay or looking at used reels?

I know on the Sealines, SHA is the current generation and the previous generation was SHV with a 6.1:1 ratio. The HV was the previous generation with a 4.9:1 ratio

I don't know why manufacturers can't just label generations sequentially with a letter or number to make it easy