Has anyound installed a Humminbird HDSI transducer? - Kayak Fishing Adventures on Big Water’s Edge

BrokeLoser · 03-24-2015, 04:44 PM

Its a pretty large ducer and it won't fit where my old Di ducer did for a shoot-through application.

Pro Angler 14

TJones · 03-24-2015, 05:33 PM

Of transducer. I had an 898 si . It had a very big transducer . I mounted multiple ways . In hull , mad frog , I even glued it to bottom of yak which was the best way . Although this created transportation issues . I finally gave up and sold unit . This transducer is similar to lss2 . It needs to be in water and a free line of sight for side imaging to work . Hope this helps some .

BrokeLoser · 03-24-2015, 05:49 PM

Quote:

Originally Posted by TJones

Of transducer. I had an 898 si . It had a very big transducer . I mounted multiple ways . In hull , mad frog , I even glued it to bottom of yak which was the best way . Although this created transportation issues . I finally gave up and sold unit . This transducer is similar to lss2 . It needs to be in water and a free line of sight for side imaging to work . Hope this helps some .

I'll post pics when I get home. This is the HdSi ducer for a 999. I thought I read on here somewhere that someone installed one in the hull at the front of the bow and was reporting good results. I couldn't find it in a search...Hmmm
Thanks for the help

TJones · 03-24-2015, 06:09 PM

Quote:

Originally Posted by BrokeLoser

I'll post pics when I get home. This is the HdSi ducer for a 999. I thought I read on here somewhere that someone installed one in the hull at the front of the bow and was reporting good results. I couldn't find it in a search...Hmmm
Thanks for the help

On deployable arm ? The head unit is very powerful , probably the only one decent other than the higher models . Side imaging and down imaging will be negated if the transducer is not directly in water . Hope this info held .

TJones · 03-24-2015, 06:13 PM

Maybe modifying this mount to accomidate hummingbird transducer .

TJones · 03-24-2015, 06:15 PM

A 1 inch ball that has a u bolt to attach directly to back bar of PA .

TJones · 03-24-2015, 06:01 PM

Same transducer . What I would recommend is checking out the deployable arm from ram . You can see videos on you tube if you google LSS 2 on pro angler . Ram makes a mount that Can clamp to back handle of PA . This will put the transducer in water below the hull line of kayak . The only negative of this type of mount , Is that it creates drag . Also debris such as kelp could get hung on to it . Great unit , but not really suited for kayaks . Of course PA is borderline of a small boat .

BrokeLoser · 03-24-2015, 08:05 PM

Quote:

Originally Posted by TJones

Same transducer . What I would recommend is checking out the deployable arm from ram . You can see videos on you tube if you google LSS 2 on pro angler . Ram makes a mount that Can clamp to back handle of PA . This will put the transducer in water below the hull line of kayak . The only negative of this type of mount , Is that it creates drag . Also debris such as kelp could get hung on to it . Great unit , but not really suited for kayaks . Of course PA is borderline of a small boat .

Man, I'm such an idiot. The other thread I thought I saw here I actually started here: http://www.hobiecat.com/forums/viewt...p?f=26&t=54051
There is guy there saying that the Si works while mounted as a shoot through...Did you ever try yours as a shoot through?
I'd really like to avoid mounting anything on the outside of the yak; if it won't work I'll just mount my Di ducer shoot through and use my 959 on the PA.

Thanks again

TJones · 03-24-2015, 09:48 PM

Wet , dry , you name . It has to be in water . Side imaging shoots a razor thin beam and it has to be free from any obstructions . I personally did not like hanging anything over kayak myself .That's when I glued it to bottom of revolution . There was a recessed spot on bottom that worked well. I had to be careful when loading and unloading kayak . It was not exactly level either , which is not recommended . At that point I had enough , and I grabbed a lowrance ready hobie . I have been using lowrance since then , and have not looked back . That unit is B A though. Blows away any of the seven or five series units. Good luck .

TJones · 03-24-2015, 09:52 PM

Quote:

Originally Posted by BrokeLoser

Man, I'm such an idiot. The other thread I thought I saw here I actually started here: http://www.hobiecat.com/forums/viewt...p?f=26&t=54051
There is guy there saying that the Si works while mounted as a shoot through...Did you ever try yours as a shoot through?
I'd really like to avoid mounting anything on the outside of the yak; if it won't work I'll just mount my Di ducer shoot through and use my 959 on the PA.

Thanks again

Of someone saying they did a shoot through and everything worked great . What a load of b.s. .

fishingfiend · 03-25-2015, 09:15 AM

I'm with TJones, I also call BS that it worked through the hull. I did a lot of testing before settling on this setup. The transducer needs be almost fully exposed to work properly.

03-24-2015, 04:44 PM	#1
BrokeLoser Senior Member Join Date: Feb 2011 Location: Corona, CA Posts: 472	Has anyound installed a Humminbird HDSI transducer? Its a pretty large ducer and it won't fit where my old Di ducer did for a shoot-through application. Pro Angler 14 __________________ "ALWAYS speak to a man as if he were standing within an arms reach of your face." Remember, everyone is a badass from the comfort of their home and behind their keyboard.

03-24-2015, 05:33 PM	#2
TJones Senior Member Join Date: Jan 2012 Posts: 2,526	Do you have pics ? Of transducer. I had an 898 si . It had a very big transducer . I mounted multiple ways . In hull , mad frog , I even glued it to bottom of yak which was the best way . Although this created transportation issues . I finally gave up and sold unit . This transducer is similar to lss2 . It needs to be in water and a free line of sight for side imaging to work . Hope this helps some .

03-24-2015, 06:15 PM	#6
TJones Senior Member Join Date: Jan 2012 Posts: 2,526	They also sell A 1 inch ball that has a u bolt to attach directly to back bar of PA .

03-24-2015, 06:01 PM	#7
TJones Senior Member Join Date: Jan 2012 Posts: 2,526	Update Same transducer . What I would recommend is checking out the deployable arm from ram . You can see videos on you tube if you google LSS 2 on pro angler . Ram makes a mount that Can clamp to back handle of PA . This will put the transducer in water below the hull line of kayak . The only negative of this type of mount , Is that it creates drag . Also debris such as kelp could get hung on to it . Great unit , but not really suited for kayaks . Of course PA is borderline of a small boat . Last edited by TJones; 03-24-2015 at 06:04 PM. Reason: Typo

03-24-2015, 09:48 PM	#9
TJones Senior Member Join Date: Jan 2012 Posts: 2,526	I tried it Wet , dry , you name . It has to be in water . Side imaging shoots a razor thin beam and it has to be free from any obstructions . I personally did not like hanging anything over kayak myself .That's when I glued it to bottom of revolution . There was a recessed spot on bottom that worked well. I had to be careful when loading and unloading kayak . It was not exactly level either , which is not recommended . At that point I had enough , and I grabbed a lowrance ready hobie . I have been using lowrance since then , and have not looked back . That unit is B A though. Blows away any of the seven or five series units. Good luck .

03-25-2015, 09:15 AM	#11
fishingfiend Senior Member Join Date: Feb 2012 Location: SoCal Posts: 196	I'm with TJones, I also call BS that it worked through the hull. I did a lot of testing before settling on this setup. The transducer needs be almost fully exposed to work properly.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode