Cheap Old Bastard kayak cart - Kayak Fishing Adventures on Big Water’s Edge

MrPatrick · 01-15-2015, 11:09 PM

When we have store displays that are no longer current we either sell them at a discount or destroy them. Car seats and baby strollers/joggers are always destroyed because of liability issues. We were going to compact a jogger today and asked the manager if I could have the wheels. It was fine with him as long as the frame and seat areas stayed at the store to be crushed. Our maintenance man's tools were locked up, I had to make do with what was available. Vise Grips, a hammer, a very small phillips screwdriver and a crescent wrench.
The front wheel assembly came off easy.
ImageUploadedByTapatalk1421391373.111432.jpg

The rear axel took some thought. It was attached to the frame with rivets through the plastic parts. I wanted to keep the axel assembly as one unit. I couldn't drill the rivets out, so I used the Vice Grips to incrementally crush the leg tubing to exposé the rivet head. When the rivet head was exposed enough I clamped on the grips and bent the head off. I tapped the rivet out of the tube with the screwdriver and the hammer. Repeat for leg two and this is what you get. The bend is an exact match for my Trident 15 hull. Some pipe insulation to keep the sliding to a minimum will be next.
ImageUploadedByTapatalk1421391973.772560.jpg
The wheels have a release lever. This lets the cart be broken down.
ImageUploadedByTapatalk1421392068.916066.jpg
ImageUploadedByTapatalk1421392082.789966.jpg

Not a heavy duty cart by any means, but it should work just fine.

And, it was FREE!!!

Sent from my iPad using Tapatalk

walrus · 01-16-2015, 07:44 AM

Did you take a kid fishing?

MrPatrick · 01-16-2015, 10:37 PM

Yes, that's all I have left.

MrPatrick · 08-03-2015, 07:12 PM

I was able to get another axel assembly and made another cart.

It has a higher center of gravity but is also wider than my standard cart. It is only about 6 inches higher. The picture makes it look like more. It breaks down and fits in the front hatch. If it doesn't work out I'll make a beach cart for coolers and towels out of these axels.

Sent from my iPhone using Tapatalk

ful-rac · 08-03-2015, 07:18 PM

Looks like that'll work nicely For your prowler!

Mr. NiceGuy · 08-03-2015, 07:38 PM

Very nice! I like your active imagination and sense of adventure.

01-15-2015, 11:09 PM	#1
MrPatrick Senior Member Join Date: Jul 2007 Location: Waiting to launch Posts: 1,381	Cheap Old Bastard kayak cart When we have store displays that are no longer current we either sell them at a discount or destroy them. Car seats and baby strollers/joggers are always destroyed because of liability issues. We were going to compact a jogger today and asked the manager if I could have the wheels. It was fine with him as long as the frame and seat areas stayed at the store to be crushed. Our maintenance man's tools were locked up, I had to make do with what was available. Vise Grips, a hammer, a very small phillips screwdriver and a crescent wrench. The front wheel assembly came off easy. ImageUploadedByTapatalk1421391373.111432.jpg The rear axel took some thought. It was attached to the frame with rivets through the plastic parts. I wanted to keep the axel assembly as one unit. I couldn't drill the rivets out, so I used the Vice Grips to incrementally crush the leg tubing to exposé the rivet head. When the rivet head was exposed enough I clamped on the grips and bent the head off. I tapped the rivet out of the tube with the screwdriver and the hammer. Repeat for leg two and this is what you get. The bend is an exact match for my Trident 15 hull. Some pipe insulation to keep the sliding to a minimum will be next. ImageUploadedByTapatalk1421391973.772560.jpg The wheels have a release lever. This lets the cart be broken down. ImageUploadedByTapatalk1421392068.916066.jpg ImageUploadedByTapatalk1421392082.789966.jpg Not a heavy duty cart by any means, but it should work just fine. And, it was FREE!!! Sent from my iPad using Tapatalk Last edited by MrPatrick; 01-15-2015 at 11:14 PM.

01-16-2015, 07:44 AM	#2
walrus Senior Member Join Date: Jul 2009 Location: Baja fish camp Posts: 478	Did you take a kid fishing? __________________

01-16-2015, 10:37 PM	#3
MrPatrick Senior Member Join Date: Jul 2007 Location: Waiting to launch Posts: 1,381	Cheap Old Bastard kayak cart Yes, that's all I have left.

08-03-2015, 07:12 PM	#4
MrPatrick Senior Member Join Date: Jul 2007 Location: Waiting to launch Posts: 1,381	Cheap Old Bastard kayak cart I was able to get another axel assembly and made another cart. It has a higher center of gravity but is also wider than my standard cart. It is only about 6 inches higher. The picture makes it look like more. It breaks down and fits in the front hatch. If it doesn't work out I'll make a beach cart for coolers and towels out of these axels. Sent from my iPhone using Tapatalk

08-03-2015, 07:18 PM	#5
ful-rac Emperor Join Date: May 2009 Location: Buena Park Posts: 3,649	Looks like that'll work nicely For your prowler! __________________ There's nothing colder than yesterday's hotdog.

08-03-2015, 07:38 PM	#6
Mr. NiceGuy Manic for Life Join Date: May 2015 Location: San Diego Posts: 839	Very nice! I like your active imagination and sense of adventure. __________________ Another ho-hum day in Paradise

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode