|
Home | Forum | Online Store | Information | LJ Webcam | Gallery | Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Display Modes |
|
07-13-2014, 11:08 AM | #1 |
Senior Member
Join Date: Jul 2006
Location: Fullerton
Posts: 1,360
|
Transducer mount on PA - through scupper??
Looking at where to mount the transducer on the PA. I really like the idea of it being in contact with the water for the best reading. Not wanting to go through the hassle of cutting a hole in the bottom I am looking at mounting the FF to the gunwale and having the transducer mounted in the "crease" right behind a scupper with the wire running down through the scupper. There is already a "wire entry point" in the sidewall that will be perfect for getting the wiring inside the hull. My thought is to run the wire to the center hatch area and notch the side of the hatch opening for the wire to run right down the scupper to allow a pretty clean install.
This seems like too obvious a mount for it not to have been previously shown here if it works, so I am thinking there is something I must be missing? Does the Mirage drive make too many bubbles that mess with the performance? Has someone else tried this with less than optimal results? Looking to get the PA on the water next Saturday if the stars align. Last edited by Hunters Pa; 07-13-2014 at 11:10 AM. Reason: typo |
07-13-2014, 11:32 AM | #2 |
Senior Member
Join Date: Aug 2011
Location: West Covina, CA
Posts: 434
|
Here's how I mount my transducer on the back of the lift bar of the PA. I split a T-PVC 1 1/2 joint and put some stainless steel pipe clamp. Then put the eye bolts to hold the bungee in place. The insulator between the pipe is pool noodle. Does a good job to rotate the PVC as a bearing. The transducer is low enough to hit the water and has no drag affect. I tested different length and it's perfect with great accuracy. One thing I gotta do is clean up the wiring and drill thru the kayak to feed the wire into the hull.
|
07-14-2014, 04:01 PM | #3 |
Senior Member
Join Date: Apr 2011
Location: Menifee, CA
Posts: 1,473
|
Can you show a side view of that mounting?
__________________
So long and thanks for all the fish... |
07-14-2014, 05:30 PM | #4 |
Senior Member
Join Date: Aug 2011
Location: West Covina, CA
Posts: 434
|
Hope this pictures help. The blue portion is the pool noodle, replaceable any time and makes a great way to keep the PVC rotating and in center position.
|
07-15-2014, 10:52 AM | #5 |
Senior Member
Join Date: Apr 2011
Location: Menifee, CA
Posts: 1,473
|
I like it, may have to adjust some things for the transducer I have, but looks good to me.
__________________
So long and thanks for all the fish... |
Thread Tools | |
Display Modes | |
|
|