Changing out hooks on irons - Kayak Fishing Adventures on Big Water’s Edge

tamddo714 · 04-02-2014, 01:35 AM

im planning on changing out the treble hooks on my salas 6xjr and 7x irons with some owner hooks. what size treble do you guys recommend and what # split ring thanks!

bus kid · 04-02-2014, 02:58 PM

search threads for "brazing rings" Wade posted up some good info on it.

here I got a little free time lots of good info below

http://www.bigwatersedge.com/bwevb/s...hlight=brazing

http://www.bigwatersedge.com/bwevb/s...hlight=brazing

heres the search

http://www.bigwatersedge.com/bwevb/s...archid=1455080

grey zone · 04-02-2014, 05:22 PM

The easiest way is to buy the same size treble with the cut eye. Use a couple of pairs of pliers and open the eye by bending it sideways just far enough to make the opening fit over the ring then bend it back. Very strong, the hook will straighten out before the eye will open. Dont cut the ring and replace it with a split-ring.

Siebler · 04-02-2014, 08:40 PM

Squidco can do it right for a minimal charge.

04-02-2014, 01:35 AM	#1
tamddo714 Senior Member Join Date: Jun 2013 Posts: 273	Changing out hooks on irons im planning on changing out the treble hooks on my salas 6xjr and 7x irons with some owner hooks. what size treble do you guys recommend and what # split ring thanks!

04-02-2014, 02:58 PM	#2
bus kid Team Keine Zugehörigkeit Join Date: Nov 2010 Location: Way out there Posts: 2,854	search threads for "brazing rings" Wade posted up some good info on it. here I got a little free time lots of good info below http://www.bigwatersedge.com/bwevb/s...hlight=brazing http://www.bigwatersedge.com/bwevb/s...hlight=brazing heres the search http://www.bigwatersedge.com/bwevb/s...archid=1455080 __________________ Não alimente os trolls------------Don't feed the trolls---------------インタネット荒らしを無視しろ

04-02-2014, 08:40 PM	#4
Siebler Senior Member Join Date: Mar 2005 Location: Richland Oregon Posts: 1,547	Squidco can do it right for a minimal charge. __________________ CJ Siebler

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

04-02-2014, 05:22 PM	#3
grey zone Senior Member Join Date: Mar 2005 Location: san diego Posts: 158	The easiest way is to buy the same size treble with the cut eye. Use a couple of pairs of pliers and open the eye by bending it sideways just far enough to make the opening fit over the ring then bend it back. Very strong, the hook will straighten out before the eye will open. Dont cut the ring and replace it with a split-ring.