|
06-14-2013, 11:30 AM | #1 |
Large Member
Join Date: Apr 2013
Location: San Diego
Posts: 316
|
Dodgers??
I have been wanting to try using a dodge to go after Halibut. I am not really sure where to start as far as a rig goes. If anyone has some tips, I would appreciate it. Main questions are how fast to drag it, how far between three way swivel and the sinker, how far between the 3 way swivel and the dodger and how far between the dodge and the bait. Thanks all.
__________________
"I shall not tiptoe through life to arrive safely at death." |
06-14-2013, 01:37 PM | #2 | |
Senior Member
Join Date: Mar 2010
Location: San Diego
Posts: 2,385
|
Quote:
http://www.bestofbiggame.com/BounceballTips.html Here's a link that I used a while back. I like using the 3 way swivel, but have not used the dodger. Good luck
__________________
No better time than being on the water, God Bless, JimmyZ |
|
06-14-2013, 07:20 PM | #3 |
Large Member
Join Date: Apr 2013
Location: San Diego
Posts: 316
|
Thanks! I am going to try that tomorrow. Seems to be the go to rig.
__________________
"I shall not tiptoe through life to arrive safely at death." |
06-14-2013, 09:02 PM | #4 |
Junior
Join Date: Jun 2012
Location: Fresno
Posts: 17
|
The proper speed depends on the dodger. Often the manufacturer will suggest a speed, but regardless you can check for yourself by letting enough line out to submerge the dodger but not so much that you can't see the dodger and hoochie/bait. Position your rod so you can see the dodger and hoochie while paddling and try various speeds to see how they affect the action. You want the dodger and hoochie to dart back and forth in an appealing fashion. If the dodger starts rolling, you are paddling too fast. It might make sense to try dodgers of different shapes, to see which has the best action at a speed you are comfortable paddling with. Good luck, and let us know how it turns out. The dodger hoochie combo can definitely work in SD bay.
Matt |
06-14-2013, 09:21 PM | #5 |
Junior
Join Date: Jun 2012
Location: Fresno
Posts: 17
|
Almost forgot to add an important point-- beware of tangles! Let your line out in a slow and controlled fashion. If on a paddle powered yak, let it out slowly, in short lengths, interrupted by paddling. You want the yak to be moving forward as line is paid out. Another tip is to use short lengths of tubing on the connections from the three way swivel to help reduce tangling. There is nothing more frustrating than checking on your hardware and realizing it was likely tangled the whole time since deployment. Depending on the action of your rod and the amount of weight you are using, you will probably notice a regular action to your rod tip associated with a properly functioning dodger.
Matt |
06-15-2013, 04:55 AM | #6 |
Senior Member
Join Date: Apr 2010
Posts: 6,856
|
One of the tricks that I learned from a great Halibut fisher(name rhymes with Meg Nephew) is to use a half dead bait or completely dead bait. The main reason for this is that if the bait (sardine) is lively it will swim forward faster than you are moving and will eventually wrap itself around the rest of the rig. Speaking from experience I can assure that shortly after the second time this happens you'll be cutting everything up and going back to some other setup.
__________________
www.facebook.com/Teamsewer |
Thread Tools | |
Display Modes | |
|
|