Ideas: 50/200 Transducer on Outback

[jorluivil]

I was going to purchase the Lowrance Scupper kit but it states that it does not work with the 50/200 tranducer. Does anyone have a 53/200 tranducer mounted under their Outback or Revo?

[salty pirate]

53/200

[Lipripper92592]

I've seen a few Revos with the 50/200kz ducers mounted on the rudder. The cable is zip tied and routed to a Hobie "grommet" on the rear deck.

[ful-rac]

don't see why it wouldn't work...? looking at the 83/200 and the 50/200...they look the same...? right? I know the dsi transducers are different...compare it with matts, he's got the 83/200 I think.

[StinkyMatt]

George, it won't help you.




Remember.....

You can't buy game!

[jorluivil]

Originally Posted by ful-rac

don't see why it wouldn't work...? looking at the 83/200 and the 50/200...they look the same...? right? I know the dsi transducers are different...compare it with matts, he's got the 83/200 I think.

I already compared the two and much like everything else mine is bigger. The 50/200 is wider and longer so it doesn't sit as snug as the 83/200. I found a few ideas on the internet but nothing that shows it mounted under the kayak.

[Deamon]

This is scaring me now...I just gooped mine on the inside. Haven't had a chance to try it out yet. Why aren't you doing that Jorge?

[tagyak]

Originally Posted by Deamon

This is scaring me now...I just gooped mine on the inside. Haven't had a chance to try it out yet. Why aren't you doing that Jorge?

if you have a high end ducer you don't want to mess with the goop. it is not going to give you accurate readings. if anything do a wet mount if you aren't going directly to the water.

[jorluivil]

Originally Posted by Deamon

This is scaring me now...I just gooped mine on the inside. Haven't had a chance to try it out yet. Why aren't you doing that Jorge?

I'm just looking for other options. If I can't find a way to mount it outside of the kayak I'll go with the putty or the pvc wet mount.

[bus kid]

Originally Posted by jorluivil

I was going to purchase the Lowrance Scupper kit but it states that it does not work with the 50/200 tranducer.

Find a guy that works in a machine shop, maybe even a guy who works in a shop and kayak fishes and maybe even a guy who works in a machine shop, kayak fishes and made a custom mount for his revo not too long ago.

If you need help finding him let me know.

http://db.tt/bNjyDKOE

[TJones]

i purchased similar model in hummingbird version . i went through different methods of installs . the first install was using the mad frog arm which is a similar idea to the ram mount shown . it is constructed of a rigid plastic arm that rides on a bolt the acts like a hinge . there were a few drawbacks . grass or weeds could collect on it and also it does create some drag pushing through water . so i tried in hull, wet, and dry mount which obviously is not good because the transducer definitely needs to be in water to get your down imaging and or side imaging . so next i decided to get the transducer back in water . i wound up mounting the transducer right underneath the seat drain scupper hole with the wire pulled through the hole . i purchased the hobie kit for capping wires and quickly ran the wire back inside the kayak so very little wire is exposed on the deck or outside the kayak . the mounting tabs on the transducer were removed as cleanly as possible with a saw and filled smooth .and the transducer can be held in place with some silicon or the plumbers putty that does not dry .the transducer is not completely recessed but dragging it on sand will not hurt it . the humming bird transducer is a little bit bigger than an altoids mint tin . not small by any means . overall i am happy with the install. when loading in the back of pickup you have to be careful not to slam the transducer .i place a towel underneath as cushion or precaution . i am not sure how big your units transducer is or if this will work for you. the outback does have deep channels so your transducer may not be exposed very much if at all . hope this idea helps . i can send pics if needed for illustration.

[TJones]

my response . but above post is what i did .

[fishingfiend]

When I had my outback, I opted for a wetmount to get accurate water temps. Ultimately, upgrading to the PA fixed my transducer mount issues. I'm sure Andy has a PA ready for you.