Done with my bait tank! - Kayak Fishing Adventures on Big Water’s Edge

Biggameaddict · 12-26-2012, 09:35 PM

It took me about a month and a half waiting for supplies and all but im done!
Supplies used:
4.7 gallon vittles vault
Pelican 1060 box
Rule 360 bilge pump
19" 5/8x3/4 inch hose
6v 12ah battery
90degree elbow
hobie bait tank straps
ss wire seal
power button
(6) ss 10-24 screws 1"
(4) one inch washers
(2) ss clamps
1/8 inch cord
goop
random washers
connectors
(3)8 inch zip ties

it was a fun build and works great. pm me if you have any questions. Thanks to Andy for supplies and answering my questions and to bwe members for helping out.

A little gift from me

I gooped the wires like stevoo did and it works great! Thanks stevoo!

Silicon on the button to keep it waterproof

dbarnett66 · 12-26-2012, 11:34 PM

I noticed that you have holes for the overflow. Does the water spill out the side and travel out through the scuppers?

Biggameaddict · 12-27-2012, 12:55 AM

Quote:

Originally Posted by dbarnett66

I noticed that you have holes for the overflow. Does the water spill out the side and travel out through the scuppers?

Yup. You gotta keep bringing fresh water in to keep the bait alive.

Cbad Mike · 12-27-2012, 03:47 AM

Looks great!
Is using OxyClean on your bait tank one of the over 101 uses on the box?

Biggameaddict · 12-27-2012, 10:24 AM

Quote:

Originally Posted by Cbad Mike

Looks great!
Is using OxyClean on your bait tank one of the over 101 uses on the box?

Lol the yak was on the table so i put it on the washing machine.

MrM · 12-27-2012, 05:19 PM

Looks good man!

12-26-2012, 09:35 PM	#1
Biggameaddict The Kayak Peddler Join Date: Aug 2012 Location: North Hollywood Posts: 591	Done with my bait tank! It took me about a month and a half waiting for supplies and all but im done! Supplies used: 4.7 gallon vittles vault Pelican 1060 box Rule 360 bilge pump 19" 5/8x3/4 inch hose 6v 12ah battery 90degree elbow hobie bait tank straps ss wire seal power button (6) ss 10-24 screws 1" (4) one inch washers (2) ss clamps 1/8 inch cord goop random washers connectors (3)8 inch zip ties it was a fun build and works great. pm me if you have any questions. Thanks to Andy for supplies and answering my questions and to bwe members for helping out. A little gift from me I gooped the wires like stevoo did and it works great! Thanks stevoo! Silicon on the button to keep it waterproof __________________ Keep your rod close, your gaff closer, and your paddle on a leash.

12-27-2012, 05:19 PM	#6
MrM Senior Member Join Date: May 2012 Location: The Matrix Posts: 643	Looks good man! __________________ -Kevin

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

12-26-2012, 11:34 PM	#2
dbarnett66 Danodog Join Date: Sep 2012 Location: Lakeside, CA Posts: 155	I noticed that you have holes for the overflow. Does the water spill out the side and travel out through the scuppers?

12-27-2012, 03:47 AM	#4
Cbad Mike Senior Member Join Date: Apr 2012 Location: Carlsbad Ca. Posts: 1,206	Looks great! Is using OxyClean on your bait tank one of the over 101 uses on the box?