lets talk hoops!

[lowprofile]

so rigging for these bugs has me running in circles. i put 50ft of rope on them, tie on a big Tide bottle, add shiny tape and a glow stick. works great in the bays to about 40ft. then i find a nice pile in 60ft... so now i rig up one with 100ft for the next outing BUT... my next outing will be in the harbor targeting 15-30ft... what do i do with all that extra rope? just let it hang off? i tried tying it in a loop but it gets prety messy.

also, attaching bait cages. you guys zip tie them in full time? or use D rings to clip them in after baiting?

how are you transporting your nets, bouyes, cages etc? pre rigged or seperate then clip it all together before the drop?

[Deamon]

Home Depot sells extention cord holders for a couple of bucks. Plastic and sturdy enough. Works great!

D-Rings

PVC frame underneath traps for a larger/lite platform on my Revolution...not tied down. One on top of the other unattached

Jim

[ctfphoto]

I have a long roped so I tie most of it up securely at home.

I use carabineers to attach bait cages.

I pre attach the first round of bait cages in the hoops pre launch so all I need to do is drop the hoop.

My cone nets stack fine on my yak and I attach with bungees.

[Aaron&Julie]

Originally Posted by Deamon

Home Depot sells extention cord holders for a couple of bucks. Plastic and sturdy enough. Works great!
Jim

x2

[Jfish36]

99 cent store have small zip tie in bag of 50 or 100 works great for bait cage

[firstgen]

Originally Posted by lowprofile

so rigging for these bugs has me running in circles. i put 50ft of rope on them, tie on a big Tide bottle, add shiny tape and a glow stick. works great in the bays to about 40ft. then i find a nice pile in 60ft... so now i rig up one with 100ft for the next outing BUT... my next outing will be in the harbor targeting 15-30ft... what do i do with all that extra rope? just let it hang off? i tried tying it in a loop but it gets prety messy.

also, attaching bait cages. you guys zip tie them in full time? or use D rings to clip them in after baiting?

how are you transporting your nets, bouyes, cages etc? pre rigged or seperate then clip it all together before the drop?

Promar is going around to different tackle shops and doing their hooping seminars.I would recommend you hit'em up to see if theirs any seminars in your area.Their you will learn everything there is to know about hooping.Hope this help.

[ful-rac]

Originally Posted by lowprofile

so rigging for these bugs has me running in circles. i put 50ft of rope on them, tie on a big Tide bottle, add shiny tape and a glow stick. works great in the bays to about 40ft. then i find a nice pile in 60ft... so now i rig up one with 100ft for the next outing BUT... my next outing will be in the harbor targeting 15-30ft... what do i do with all that extra rope? just let it hang off? i tried tying it in a loop but it gets prety messy.

also, attaching bait cages. you guys zip tie them in full time? or use D rings to clip them in after baiting?

how are you transporting your nets, bouyes, cages etc? pre rigged or seperate then clip it all together before the drop?

50ft of rope in my opinion is good for working areas that are no deeper than 35-40ft. You should use the commercial style bouys that they sell at the tackle shops. It's a good investment considering how much all your gear costs. If your tide bottle develops a leak, or gets run over bye, bye gear!

I just switched over to some new rope this season and so far it's working out great. Gotta use low memory rope, otherwise you'll be dealing with tangles instead of hooping. Try this stuff it seems to work better than the poly hollow stuff.

Home depot reflective rope.


As far as what you should do about your excess line, just add weight to the end of your line and let it sink. So you will have 60ft of rope on one side and 40ft on the other. If the tide rises or falls it's self adjusting.

Securing bait cages, use the promar bait cage clips. It speeds up baiting up and breaking down. Plus you save on extra zip-ties. Only way to go in my opinion!

I transport my hoops on my yak fully rigged and ready to fish, bait cage attached.
I just stack em' up behind me, and fire 'em out there when it's time.

These work great keeping everything organized

[ful-rac]

Yeah those cable clamps are good too, I have a bunch of those myself...

Originally Posted by ful-rac

Yeah those cable clamps are good too, I have a bunch of those myself...

I also use them to attach my bait cages to my hoops. They don't have any problems with saltwater and they're cheap.

[Badtaste2k]

Originally Posted by Drake

These work great keeping everything organized

Those look good. Where did you find them and what are they called?

Thanks

Dan

[ful-rac]

Originally Posted by Badtaste2k

Those look good. Where did you find them and what are they called?

Thanks

Dan

They are called Cable Cuffs, you can get them at home depot

[Bigneedle]

where did you get the supply to make the torpedo float?? thx

[Fiskadoro]

Threads like these make me feel like an old timer.

I've been using the exact same rope float setup I first used over a decade ago. Haven't lost a single hoop since I started using it.



I have 50ft, 75ft, and 100ft rope sets which I change out loop to loop depending where I'm hooping, and I can make small depth adjustments with the longline clip. The advantage of the weighted clip is the excess rope stays 5ft down under the prop zone.


Here's my torpedo float light setup.


It's just an egg float, some thin wall PVC, 2 part urethane foam, reflective tape, and a clear container on the end with a strobe in it.

I used to do flat nets but I now run my own smaller diameter cone nets I designed and built myself for hooping from my hoop kayak a FND.



Those nets meet the regs. The opening is the size of a Danielson, but the are as tall as the taller Promars. With a smaller diameter base they are just as effective as the standard cones but easier to pull.

Here's how I carry them folded down.



As you can see I use minimal electronics for hooping. That's my original old school Garmin 45, and Garmin 120 finder that I've had since I started kayaking. They've lasted me over a decade of hooping and I don't need anything fancier.

The boom makes it easier to pull, so I can stay out longer.




I store my bugs in a box I built behind the seat.




Works for me. Like I said I have not really changed this setup at all since I first started using it.

Jim

[skrilla]

^ Nice Jim. Diggin that purpose built kayak.

Originally Posted by firstgen

Promar is going around to different tackle shops and doing their hooping seminars.I would recommend you hit'em up to see if theirs any seminars in your area.Their you will learn everything there is to know about hooping.Hope this help.

I was at the last seminar at Turner's. Great tips and tricks by Jim aka Saba Slayer. Was a refresher for me and learned a few new things. But alas I don't see any more scheduled in the future. ful-rac did post up some good tips that were mentioned in the seminar.

[Fiskadoro]

Originally Posted by skrilla

^ Nice Jim. Diggin that purpose built kayak.

Thanks!! It's slow but does the job. Those are old photos. Doing some work on her tonight, not as shiney as she used to be, but still good...

If it wasn't for hooping I would of probably sold it, but you can't get a better platform for hoop netting then a FND with it's high initial stability.

Originally Posted by skrilla

I was at the last seminar at Turner's. Great tips and tricks by Jim aka Saba Slayer.

Jim's an old friend, I can't even remember the last time we hooped together, extremely knowledgeable when it comes to bugs, from shallow to deep your not going to find anyone who knows hoopnetting better then Jim.