What's your 'spare parts' quick list for a long vacation

[Mongo Johnson]

To take the prudence of having a backup rudder pin handy under your hatch a tad further . . . What's a savvy collection of "parts" to order and bag in your boat for any "just in case" moments?

Let's say you're heading up the coast for a week of yakkin' fun. Lots of putins, a few surf launches, floats and sunsets.

But, you'll be far from any Hobie store or even a Walmart. What's a good bag of 'just in case' parts and tools to toss in your gear bag or boat?

I'm thinking things like an added pedal strap, another rudder pin, an extra set of flippers . . . durables you can buy and bag and use "someday."

Are there any particular tools to have handy on the list, stuff that's unique to having a Hobie yak as your patient?

I'm especially foggy on Mirgage drive parts, much less on tuning it.

[dorado50]

Don't forget the duct tape.....

[RedSledTeam]

WD-40, Duct-Tape and a multi-tool (I use a leatherman) should take care of it all. We never flew a single mission in space without the duct tape!

[mtnbykr2]

I agree, your normal "run of the mill" survival $hit, but a rudder pin, might not be a bad idea, but I have been on plenty of trips like that, and I am more concern with tackle malfunction, breakage, or loss, not so much yak issues, but I have alot of faith in Hobie.
That being said, I did have a trip where the rudder control handle came off about four miles out, and having to use the paddle to stear, fun times, but that was my fault for not checking my gear, I wouldn't worry too much with the terminal Hobie...IMHO...

[yaksailor]

Yeah, the thing about a Hobie is that it has more moving parts, which means more things to go wrong. Obviously, I don't realize this, since I own 2. Maybe for spare parts?

-Definitely carry a spare rudder pin. I had one break while using a large sail rudder while camping. Luckily, I had another Revo to swipe one from.

-On the same trip, the split ring on my Mirage drive fin pin broke, the pin came out, and I had to use paddle power for the rest of the day.

-I always carry scupper plugs, since I loosen them during launch and sometimes they get lost.

-I've broke 3 pairs of Hobie paddles, always during launch. It's not fun to land with half a paddle. Shoot, I only have Bending Branches now.

-Phillips screwdriver to replace a broken rudder, or change to a sail rudder. Also, to tighten up the steering braid. Pliers help.

-Steering cord, just in case. This would be a major pain to change at a campsite, let alone a garage with proper tools.

-Those little quarter-turn quick-release hubs on the Wheeleez Hobie-Trax 22cm wheels. They break if you look at them funny. Cool concept though. The whole cart breaks down and fits in under the deck.

-Spare Wheeleez tire, since they pop if you turn a corner too fast..

-Toothbrush and terminal cleaner

-Hex key to tighten the steering knob. Of course, if your steering stem gets so loose that it falls into the hull, it's too late!

[tacmik]

Originally Posted by yaksailor

Yeah, the thing about a Hobie is that it has more moving parts, which means more things to go wrong. Obviously, I don't realize this, since I own 2. Maybe for spare parts?

-Definitely carry a spare rudder pin. I had one break while using a large sail rudder while camping. Luckily, I had another Revo to swipe one from.

-On the same trip, the split ring on my Mirage drive fin pin broke, the pin came out, and I had to use paddle power for the rest of the day.

-I always carry scupper plugs, since I loosen them during launch and sometimes they get lost.

-I've broke 3 pairs of Hobie paddles, always during launch. It's not fun to land with half a paddle. Shoot, I only have Bending Branches now.

-Phillips screwdriver to replace a broken rudder, or change to a sail rudder. Also, to tighten up the steering braid. Pliers help.

-Steering cord, just in case. This would be a major pain to change at a campsite, let alone a garage with proper tools.

-Those little quarter-turn quick-release hubs on the Wheeleez Hobie-Trax 22cm wheels. They break if you look at them funny. Cool concept though. The whole cart breaks down and fits in under the deck.

-Spare Wheeleez tire, since they pop if you turn a corner too fast..

-Toothbrush and terminal cleaner

-Hex key to tighten the steering knob. Of course, if your steering stem gets so loose that it falls into the hull, it's too late!

Damn. Leaves little room for fishing gear. Glad I paddle, less to carry and worry about.

[mtnbykr2]

Originally Posted by yaksailor

Yeah, the thing about a Hobie is that it has more moving parts, which means more things to go wrong. Obviously, I don't realize this, since I own 2. Maybe for spare parts?

-Definitely carry a spare rudder pin. I had one break while using a large sail rudder while camping. Luckily, I had another Revo to swipe one from.

-On the same trip, the split ring on my Mirage drive fin pin broke, the pin came out, and I had to use paddle power for the rest of the day.

-I always carry scupper plugs, since I loosen them during launch and sometimes they get lost.

-I've broke 3 pairs of Hobie paddles, always during launch. It's not fun to land with half a paddle. Shoot, I only have Bending Branches now.

-Phillips screwdriver to replace a broken rudder, or change to a sail rudder. Also, to tighten up the steering braid. Pliers help.

-Steering cord, just in case. This would be a major pain to change at a campsite, let alone a garage with proper tools.

-Those little quarter-turn quick-release hubs on the Wheeleez Hobie-Trax 22cm wheels. They break if you look at them funny. Cool concept though. The whole cart breaks down and fits in under the deck.

-Spare Wheeleez tire, since they pop if you turn a corner too fast..

-Toothbrush and terminal cleaner

-Hex key to tighten the steering knob. Of course, if your steering stem gets so loose that it falls into the hull, it's too late!

Yeah been there done that...

[Deefeesha]

Originally Posted by RedSledTeam

WD-40, Duct-Tape and a multi-tool (I use a leatherman) should take care of it all. We never flew a single mission in space without the duct tape!

Is it true that DFG frowns upon having wd-40 on a fishing vessel?

[maui jim]

Come on guys. ...really??
Too much stuff to bring. Just scavage the beach an McGiver it.
Im mean your taking up too much beer room with all those hobie parts

[StinkyMatt]

Harbor Freight sells a portable welder for a hundred bucks.

It is very small and fits in my front hatch.

I never leave the shore without the welder. Mig, arc, whatever, I can weld any metal parts on the water.


Another overlooked item is a water desalination system, mine runs on 12 volts and puts out 50 gpm. You need fresh water to rinse the welder parts with.



Seriously, don't over complicate your day with too much stuff.

[Fiskadoro]

Originally Posted by Mongo Johnson

Let's say you're heading up the coast for a week of yakkin' fun. Lots of putins, a few surf launches, floats and sunsets. . . . What's a savvy collection of "parts" to order and bag in your boat for any "just in case" moments?

[maui jim]

Fishadoro....my New Friend....

Good taste in good booze.....

[Mongo Johnson]

As my sense of s**t-to-pack developes, I see the thread trending a different direction. I think I have enough info on s**t that breaks . . .

So, I must suggest Zaya Rum as WONDERFUL alternative to those who may find even good Scotch caustic. And, rum is rather a seafaring beverage.

(P.S. - Mongo LOVE "Oban," it was supposed to be the line in the movie. Not "candy.")