|
06-27-2012, 12:56 AM | #1 |
Guest
Posts: n/a
|
PA Paddle clip
Does anyone know where I can find the paddle clip that comes with the new PA12. It clips on the rail of the PA, keeping it out of the way. I like the design, just can't seem to find it. I've googled it I promise
|
06-27-2012, 06:05 AM | #2 |
.
Join Date: May 2010
Posts: 1,155
|
i want to buy a couple too, i'll go to fastlanes this week and see if they sell them. i didnt see it in the catalog.
__________________
|
06-27-2012, 06:15 AM | #3 |
Senior Member
Join Date: May 2007
Location: Santa Ana
Posts: 334
|
paddle clip
what I use on my PA14 is a set of oar holders from Outcast pontoon boats they just strap to the rail and hold the paddle fine. I am at work now but tonight I will take a picture and post it.
__________________
you hookum and I'll fry yum |
06-27-2012, 08:35 AM | #4 |
Junior
Join Date: Apr 2012
Location: Lake Elsinore
Posts: 25
|
If you want a free one there's a complete paddle from a PA 12 floating around La Jolla somewhere. Seriously though, I would reconsider using those paddle clips. I've got a PA 12 and since I've had it I've had issues with the paddle popping off and dropping in the water. Luckily every time I've noticed it happen, that is until this past Saturday while out at La Jolla, I looked down and my paddle was missing. No idea when or where but it was gone. Luckily, the surf was small so landing without it was a non issue.
On a side note, anybody have a paddle for sale? |
06-27-2012, 09:28 AM | #5 |
Guest
Posts: n/a
|
There's the extra velcro strap that goes around it to keep that from happening. Fastlane doesnt sell them
|
06-27-2012, 09:36 AM | #6 |
Junior
Join Date: Apr 2012
Location: Lake Elsinore
Posts: 25
|
I actually had a bungee permanently attached to the handle that I just wrapped around the paddle after clipping it to the handle, but the one time I forgot to do it...
Not trying to talk you out of it, but at least you'll be more aware of it if you do end up finding the clip. Once I find a new paddle I'm going to figure out something that keeps it towards the inside of the boat. Probably just break it in half and slide it under the bungees in the back. |
Thread Tools | |
Display Modes | |
|
|