|
06-19-2012, 06:57 PM | #1 |
Junior
Join Date: Nov 2010
Posts: 5
|
Transducer question
I have been lurking around here for over two years and have finally purchased a Malibu Stealth 14. I just received my fishfinder, a Lowrance Mark-4 DSI in the mail today. I have been researching how to mount this and had what is probably a bad idea but figured I would ask anyway. I am thinking about doing a scupper mount but not using anything other than epoxy or ? to hold the transducer in place. Sorry about the fat thumb in the picture but hopefully I have explained this good enough. Thank you in advance and I am looking forward to meeting you out on the water
|
06-19-2012, 07:07 PM | #2 | |
Living Da Dream!
Join Date: May 2012
Location: SAN DIEGO
Posts: 414
|
Quote:
__________________
Don't tread on me |
|
06-20-2012, 07:11 PM | #3 |
Junior
Join Date: Nov 2010
Posts: 5
|
Thanks for the speedy reply. Your mount looks great, I was just thinking without the mount and using some sort of adhesive I could accomplish three things.
1. Save fifty Dollars for the mount 2. Bring the transducer closer to the yak 3. Leave the scupper hole open I will probably end up purchasing the scupper mount. Thank you |
Thread Tools | |
Display Modes | |
|
|