San Clemente - Kayak Fishing Adventures on Big Water’s Edge

jorluivil · 06-02-2011, 08:12 AM

This questioned is geared more towards the guys that have fished this island.

What plastics/irons worked best for you?

RedSledTeam · 06-02-2011, 08:28 AM

Tady 45 Blue & White. Seek Bary Brightenburg for info on the plastics.

JoeBeck · 06-02-2011, 10:31 AM

All your typical irons. I have had good luck with slugs for the grumpy calico, ones in brown and also red. Besides that all your typical swimbaits you use at the kelp inshore here.

If you are not familiar with the slug check out these links

http://www.bdoutdoors.com/forums/bas...-question.html

http://www.bigwatersedge.com/bwevb/s...ead.php?t=3554

https://www.jigstop.com/store/listpr...ductLine=Slugs

INGRIDSDAD · 06-02-2011, 12:10 PM

x2 on the slugs. Nothing better than surface action.

If you pick up a couple, bring super glue with you. That way you can make them last alot longer.

-scallywag- · 06-02-2011, 01:12 PM

for the calicos at SCI, I would just stick to the surface irons around the boilers, you usually won't have any problem getting them to hit even the larger 6x/7x type plugs...plastics just get beat up. but if you must use them than the superglue works wonders.

06-02-2011, 08:12 AM	#1
jorluivil Senior Member Join Date: Apr 2010 Posts: 6,856	San Clemente This questioned is geared more towards the guys that have fished this island. What plastics/irons worked best for you? __________________ www.facebook.com/Teamsewer

06-02-2011, 10:31 AM	#3
JoeBeck Senior Member Join Date: Nov 2008 Location: San Diego Posts: 370	All your typical irons. I have had good luck with slugs for the grumpy calico, ones in brown and also red. Besides that all your typical swimbaits you use at the kelp inshore here. If you are not familiar with the slug check out these links http://www.bdoutdoors.com/forums/bas...-question.html http://www.bigwatersedge.com/bwevb/s...ead.php?t=3554 https://www.jigstop.com/store/listpr...ductLine=Slugs Last edited by JoeBeck; 06-02-2011 at 10:43 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

06-02-2011, 08:28 AM	#2
RedSledTeam Daddeo Join Date: Jul 2010 Location: OC Posts: 660	Tady 45 Blue & White. Seek Bary Brightenburg for info on the plastics.

06-02-2011, 12:10 PM	#4
INGRIDSDAD Senior Member Join Date: Oct 2007 Location: Riverside Posts: 108	x2 on the slugs. Nothing better than surface action. If you pick up a couple, bring super glue with you. That way you can make them last alot longer.

06-02-2011, 01:12 PM	#5
-scallywag- Banned Join Date: Mar 2009 Location: on the road... Posts: 598	for the calicos at SCI, I would just stick to the surface irons around the boilers, you usually won't have any problem getting them to hit even the larger 6x/7x type plugs...plastics just get beat up. but if you must use them than the superglue works wonders.