What should I do. . . - Kayak Fishing Adventures on Big Water’s Edge

DanaPT · 08-31-2011, 10:36 AM

In august I flipped my kayak on a surf launch and clearly F'd UP the gears.

It's a shimano chronarch that has no business in salt water (but it is what it is.)

Are these tough to clean and service on your own or better off having a pro do it?

fishsouthcounty · 08-31-2011, 12:54 PM

probably only cost ya 15-20 bucks to have them do it at the Shimano Service Center in Irvine.

kobra · 08-31-2011, 03:23 PM

For something like that to happen to a chronarch, if it was mine, I'd have Ken's Custom Reels take care of it. But if Shimano is closer to you, they would be my second choice. If it was a hardier reel, it probably wouldn't be as big of a deal. Just my opinion.

bus kid · 08-31-2011, 05:33 PM

If you are a do it yourself guy look to alan tani

http://alantani.com/index.php?board=9.0

or mikes

http://www.mikesreelrepair.com/schem...ls.php?album=8

If not you can pay someone, or go to shimano.

Amish Ed · 08-31-2011, 10:15 PM

Shimano seems to do almost everything for $25. I'd take it to them.

DanaPT · 09-01-2011, 09:15 AM

For $25 plus shipping, it'll go to shimano.

Their repair center is 2 miles from where I work. Thanks for the heads up. Hopefully I can drop off and pick it up (save a little on shipping).

http://www.shimano.com/publish/conte..._Services.html

Amish Ed · 09-01-2011, 09:45 AM

Being that close you can definitely drop it off and pick it up. No shipping needed.

fishsouthcounty · 09-01-2011, 09:54 AM

ya they will hold it for you for a few days if they finish it and its your weekend or something. Just pick it up when you go back to work. Heads up, i took a few reels in about 3 weeks ago and it took 2 weeks for them to get done....they were super backed up. Might have just been with all the tuna starting to heat up.

DanaPT · 09-03-2011, 08:08 AM

Oh well. I have other gear I can fish with for now.

Thanks for all the replies.

fishsouthcounty · 09-03-2011, 11:07 AM

ya i dropped off a TLD 20/40 and got it back in about 14 or 15 days....also had dropped off 2 old corvalus 400's and they told me they were going to ship me out 2 new ones by mid week this week but havent seen those yet.

08-31-2011, 10:36 AM	#1
DanaPT Senior Member Join Date: Sep 2010 Location: South OC Posts: 1,606	What should I do. . . In august I flipped my kayak on a surf launch and clearly F'd UP the gears. It's a shimano chronarch that has no business in salt water (but it is what it is.) Are these tough to clean and service on your own or better off having a pro do it?

08-31-2011, 05:33 PM	#4
bus kid Team Keine Zugehörigkeit Join Date: Nov 2010 Location: Way out there Posts: 2,854	If you are a do it yourself guy look to alan tani http://alantani.com/index.php?board=9.0 or mikes http://www.mikesreelrepair.com/schem...ls.php?album=8 If not you can pay someone, or go to shimano. __________________ Não alimente os trolls------------Don't feed the trolls---------------インタネット荒らしを無視しろ

08-31-2011, 10:15 PM	#5
Amish Ed Senior Member Join Date: Jun 2005 Location: Grants Pass, OR Posts: 1,906	Shimano seems to do almost everything for $25. I'd take it to them. __________________ Amish Ed You can't catch it again if it's dead!

09-01-2011, 09:15 AM	#6
DanaPT Senior Member Join Date: Sep 2010 Location: South OC Posts: 1,606	Thanks, I'm sold. For $25 plus shipping, it'll go to shimano. Their repair center is 2 miles from where I work. Thanks for the heads up. Hopefully I can drop off and pick it up (save a little on shipping). http://www.shimano.com/publish/conte..._Services.html

09-01-2011, 09:45 AM	#7
Amish Ed Senior Member Join Date: Jun 2005 Location: Grants Pass, OR Posts: 1,906	Being that close you can definitely drop it off and pick it up. No shipping needed. __________________ Amish Ed You can't catch it again if it's dead!

08-31-2011, 12:54 PM	#2
fishsouthcounty Senior Member Join Date: Jan 2011 Location: San Juan Capistrano, Ca Posts: 518	probably only cost ya 15-20 bucks to have them do it at the Shimano Service Center in Irvine.

08-31-2011, 03:23 PM	#3
kobra Senior Member Join Date: May 2005 Location: oceanside Posts: 880	For something like that to happen to a chronarch, if it was mine, I'd have Ken's Custom Reels take care of it. But if Shimano is closer to you, they would be my second choice. If it was a hardier reel, it probably wouldn't be as big of a deal. Just my opinion.

09-01-2011, 09:54 AM	#8
fishsouthcounty Senior Member Join Date: Jan 2011 Location: San Juan Capistrano, Ca Posts: 518	ya they will hold it for you for a few days if they finish it and its your weekend or something. Just pick it up when you go back to work. Heads up, i took a few reels in about 3 weeks ago and it took 2 weeks for them to get done....they were super backed up. Might have just been with all the tuna starting to heat up.

09-03-2011, 08:08 AM	#9
DanaPT Senior Member Join Date: Sep 2010 Location: South OC Posts: 1,606	Yeah, turn time. . . 3 weeks. . . Oh well. I have other gear I can fish with for now. Thanks for all the replies.

09-03-2011, 11:07 AM	#10
fishsouthcounty Senior Member Join Date: Jan 2011 Location: San Juan Capistrano, Ca Posts: 518	ya i dropped off a TLD 20/40 and got it back in about 14 or 15 days....also had dropped off 2 old corvalus 400's and they told me they were going to ship me out 2 new ones by mid week this week but havent seen those yet.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode