Kayak Fishing Adventures on Big Water’s Edge - View Single Post

mazilla · 10-10-2011, 08:25 AM

I really enjoy paddling, but I also have a love for tinkering with things...so I tossed a motor on my Fish and Dive just because.

I did a 4 hour test run on Saturday night in the big bay, worked like a charm. The motor is a BassPro Prowler 30LB, it was 99.00 so I figured it would be the best candidate to be cut up. In the bay I can keep a steady 3 MPH, seems like I could go faster in reverse however...which was kind of funky to test. It feels weird hauling ass backwards! haha

I came up with the design over the three days I spent working on it, I planned it as I went. The entire system comes off in about 3 minutes, leaving only the two "L" brackets on the boat. The remote control for the motor is just a random plastic box I had lying around, I mounted the speed control switch and the on/off LED and sealed it up with Goop, then attached the box to the boat with a velcro rectangle. In the future I plan on doing something a little more slick, I just wanted to see if it would work before putting too much effort into it.

I'm still working on a way to bring the motor up, I have a latch release in place but it only works in the full down position...I have to work on that still.

COST:

BPS "Prowler 30" - 99.00
foot peddals - 35.00
Steel - 25.00
Paint - 7.00
Misc hardware - 30.00

Approx 15 hours(mostly wasted staring at the kayak thinking

)

Fire away with any questions(except any having to do with the Vessel Assist measuring tape on my hull! LOL)

10-10-2011, 08:25 AM	#1
mazilla advocatus diaboli Join Date: Aug 2011 Location: San Diego Posts: 154	Motorized my Cobra Fish and Dive. I really enjoy paddling, but I also have a love for tinkering with things...so I tossed a motor on my Fish and Dive just because. I did a 4 hour test run on Saturday night in the big bay, worked like a charm. The motor is a BassPro Prowler 30LB, it was 99.00 so I figured it would be the best candidate to be cut up. In the bay I can keep a steady 3 MPH, seems like I could go faster in reverse however...which was kind of funky to test. It feels weird hauling ass backwards! haha I came up with the design over the three days I spent working on it, I planned it as I went. The entire system comes off in about 3 minutes, leaving only the two "L" brackets on the boat. The remote control for the motor is just a random plastic box I had lying around, I mounted the speed control switch and the on/off LED and sealed it up with Goop, then attached the box to the boat with a velcro rectangle. In the future I plan on doing something a little more slick, I just wanted to see if it would work before putting too much effort into it. I'm still working on a way to bring the motor up, I have a latch release in place but it only works in the full down position...I have to work on that still. COST: BPS "Prowler 30" - 99.00 foot peddals - 35.00 Steel - 25.00 Paint - 7.00 Misc hardware - 30.00 Approx 15 hours(mostly wasted staring at the kayak thinking ) Fire away with any questions(except any having to do with the Vessel Assist measuring tape on my hull! LOL) Last edited by mazilla; 10-10-2011 at 09:41 AM.