Quote:
Originally Posted by Iceman
With pin holes in the scupper I like to hit inside and out if possible with marine goop after completely drying and possibly scuffing the surface with 80 grit sand paper.
Too hard to weld.
|
Thanks, Ice.
The only hatch I have on the Prowler 15 is the bow hatch... no way I can reach back to the TW.
I roughed up the inside of the scupper from the outside of the boat (
) and slathered in a fine cylinder of the Lexel snot.
We'll see.
I'm feeling pretty good about it. It was a substantial leak, but it was only in one place. Shouldn't be too hard to knock it down.
I'm taking the boat up to the Sierras this weekend for opener - so I'll be on stupid water for long hours. I'll know more tomorrow and likely give it another coat before I leave on Thursday night.
-K