Quote:
Originally Posted by jaywo
You look like you've done this before so I intend on copying you a lot. I have an x13 that I have yet to drill a whole in. Part of being new to this and a pansy I guess. Can you tell me specifically how you put the plug together for the bow scupper, specifically the screw type and how you attached the cord. I also wanted to get your thoughts on putting a 4 inch hatch in the bow well to access the inside of the hull. I want to put my FF at the end of one of the footwells to keep it off the center bridge, but can't do it without inner hull access from the inside of the live well. Thanks
|
I'll put some pics up of the plug tomorrow, it's real simple. Andy "Iceman" did that hatch there already...maybe he'll respond or give him a call at the oex sunset beach store. I would do it another way if all I wanted to do was put a fish finder there. I would've used those plastic thing-a-ma-jigs that you pound into a hole and then when you screw the screw it "stars" out. They rate for like 125lbs of pressure. Then tape the power and ducer wire ends to a straightened out clothes hanger and feed the wire up the hole to the FF. Use the same plug type to make that hole water tight.