Quote:
Originally Posted by TJones
The pump is threaded and you can get an adapter from Home Depot to attach a blue flexible hose sold in different lengths . Double female adapter, blue flex hose which has double male ends, and you can even buy cap to make tank water tight. This will help for priming as suggested in above posts. I can post pics of all parts if needed? Set tank on 5 gallon bucket filled with water and prime with hose. If flow is slow I would check your battery voltage . Is the connector on battery original ? If not, make sure pump is not wired backward which would run pump in reverse direction . And last but not least , with tank installed on kayak inspect the tube length how much is protruding from bottom of kayak.
|
This helps a lot when you have to blow the clogs out of the pump.