Quote:
Originally Posted by FishNinjaY
I wondered if anyone ever tried running the transducer to a spot on the bottom near a scupper hole, but then used a heat gun to soften the area, and mold inward an indentation, with a glass bottle? This way the transducer would be recessed and not scrape on the sand or ground? Any thoughts?
|
Quote:
Originally Posted by Baitman
Two reasons not to do that heat gun trick.
One is it won't work WRONG Memory will push back to original shape WRONG,,, only with distortion WRONG.
Two, you'll weaken the area WRONG. (Because you can re enforce the area to be actually stronger)
|
YES I have done this. I had a busted up kayak that I molded the underside of it for a transducer. I got the idea and then practiced on the busted up kayak. It is tricky but possible. I did a total of 4 good and workable indentations. I did not do them near the scupper holes because if it got Fd up it would be too hard to repair. I used a blow torch and a heat gun. NO, memory does not push it back into shape as stated by Baitman. It takes some time because you definately dont want to rush doing it. I decided not to do it on my Malibu only because I dont think it would make a difference since I use an Eagle Cuda FF. If I had a better FF like the Lowrance 5 then I would have done it. If its something that your really considering contact me. I will not do it for you because I dont want to be responsible for your kayak but I will explain exactly how I did it, and did it correctly.
Mike