Kayak Fishing Adventures on Big Water’s Edge - View Single Post

Billy V · 07-09-2012, 09:54 PM

The Old Silver Saltist 40 (Star Drag) in 4.9:1 gear ratio is the one you want.
If you install a set of $15 carbotex drag washers, its as good as it gets.

They are strong, and easy to service. The bearings can be changed out without having to use any tools (unlike the new ones).

-They are made better than the new black ones in my opinion. The spool axle is thicker than the new black models, and its not crossed drilled creating a potential weak spot. Plus you can get the low gear ratio on the Old Silver Model (the new black ones are all 6.4:1)

The cross drilled axle pin that retains the spool bearing can develop some corrosion. Then you must use a press pin tool to remove the retaining pin - because if you pound it out with the wrong tool you can bend the spool axle.
-Then you will develop a wobble in the spool.

If you find a used Silver Model buy it. The silver paint does tend to scratch, but who cares they are battle scars.

I own 13 of them.
----------------------------------------------------
The Sealine 40 HA in 4.9:1 is another good choice for live bait. They are damn tough reels, and will survive the kayak environment better than most any reel.
-If you pack/and surround the outside handle bearing with grease its bulletproof.

On Sale Cheap @ Charkbait San Diego right now. Its an unadvertised IN Store Special, call Mike and tell him your from BWE.

07-09-2012, 09:54 PM	#7
Billy V Senior Member Join Date: Sep 2006 Location: Bay Ho Posts: 1,382	The Old Silver Saltist 40 (Star Drag) in 4.9:1 gear ratio is the one you want. If you install a set of $15 carbotex drag washers, its as good as it gets. They are strong, and easy to service. The bearings can be changed out without having to use any tools (unlike the new ones). -They are made better than the new black ones in my opinion. The spool axle is thicker than the new black models, and its not crossed drilled creating a potential weak spot. Plus you can get the low gear ratio on the Old Silver Model (the new black ones are all 6.4:1) The cross drilled axle pin that retains the spool bearing can develop some corrosion. Then you must use a press pin tool to remove the retaining pin - because if you pound it out with the wrong tool you can bend the spool axle. -Then you will develop a wobble in the spool. If you find a used Silver Model buy it. The silver paint does tend to scratch, but who cares they are battle scars. I own 13 of them. ---------------------------------------------------- The Sealine 40 HA in 4.9:1 is another good choice for live bait. They are damn tough reels, and will survive the kayak environment better than most any reel. -If you pack/and surround the outside handle bearing with grease its bulletproof. On Sale Cheap @ Charkbait San Diego right now. Its an unadvertised IN Store Special, call Mike and tell him your from BWE. __________________ Last edited by Billy V; 07-09-2012 at 10:20 PM.