Kayak Fishing Adventures on Big Water’s Edge - View Single Post

J3FFro · 04-02-2012, 03:21 PM

Hi all,

I recently purchased a Piranhamax from here and installed the ducer using the "in the hull" method with GOOP.

First installation was done without any foam cutout. It was cured for 2 days and then tested with only the temperature showing.

Second installation was done using the "in the hull" method but this time I used a foam with the ducer cutout. Mounted the foam first with GOOP, waited awhile, then apply GOOP inside the cutout and mounted the ducer with weight on top. I didnt have a chance to test it out yet but was concern if I'm installing it the right way.

Feedback is greatly appreciated.
Thanks in advance BWE!

04-02-2012, 03:21 PM	#1
J3FFro Senior Member Join Date: Feb 2012 Location: Cali Posts: 120	Need help mounting transducer Hi all, I recently purchased a Piranhamax from here and installed the ducer using the "in the hull" method with GOOP. First installation was done without any foam cutout. It was cured for 2 days and then tested with only the temperature showing. Second installation was done using the "in the hull" method but this time I used a foam with the ducer cutout. Mounted the foam first with GOOP, waited awhile, then apply GOOP inside the cutout and mounted the ducer with weight on top. I didnt have a chance to test it out yet but was concern if I'm installing it the right way. Feedback is greatly appreciated. Thanks in advance BWE!